521929
41
Zoom out
Zoom in
Previous page
1/83
Next page
40
GB
Wake On LAN
If you use a computer as a UPnP server for playing your music les via your radio, you may not
wish to keep that computer running when you are not using the radio. If your computer is suitably
congured, it can either shut down, or enter a standby or hibernation state when it is not being
used.
Your radio can wake up a computer which has shut down using a Wake On LAN command via
the network provided that the radio has previously connected to a UPnP server application on
that computer. A computer which is not currently active will be shown with a question mark in the
list of UPnP servers.
Many computers will not respond to Wake On LAN commands from the radio in all modes, and
may require software, device driver, BIOS, hardware or router configuration changes for this
function to operate. Failure of a computer to respond to Wale On Lan is not considered a fault of
the radio.
Prune servers
Your radio stores details of the UPnP servers that it has seen via its network connection in its
internal memory. If you use the radio at different locations you may nd that there are servers
listed by the radio that are no longer available. The prune servers functions allows the list to
be reinitialized so that only active UPnP servers on the currently connected network are shown
when selecting ‘Shared Media’ from the Music Player menu.
1. Press the Menu button to enter the main Music Player menu.
2. Rotate the Tuning Control Rotary until ‘Prune servers’ is highlighted on the display. Press the
control.
3. To remove servers that are no longer required rotate the Tuning Control Rotary until ‘Yes’ is
highlighted on the display. Press the control to cause the servers to be removed.
4. If you do not wish to prune servers rotate the Tuning Control Rotary to highlight ‘No’ and press
the control to conrm.
My Playlist
Repeat play: Off
Shuffle play: Off
Clear My playlist
Prune servers
Prune servers
Prune shared media
wake on LAN servers?
>
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean WFR-28D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean WFR-28D in the language / languages: English as an attachment in your email.

The manual is 7,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean WFR-28D

Sangean WFR-28D User Manual - German - 83 pages

Sangean WFR-28D User Manual - Dutch - 83 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info