Manual Sangean WFR-28D (page 10 of 83) (English)

521929

Zoom out

Zoom in

1/83

10.

11.

12.

13.

You will first need to identify your network in the list of network names presented by the

Network Wizard. If no networks are found then you may have to get your wireless router wor-

king (please see the instructions supplied with it) or you may be too far from the router.

When the radio nds your wireless network, it displays the Network Name (SSID) for the wi-

reless access point on the screen. This is a name that is allocated to the access point in your

router by the person who set up the network – for example: ‘Jones family’ or ‘Paul’s network’.

If the router supports WiFi Proteced Setup, then ‘[WPS]’ will be shown in front of the SSID. It

is possible, and in some locations highly likely, that your radio will nd more than one wireless

network, in which case you should choose which one you need to connect to.

Rotate the Tuning Control Rotary to see the SSID for each wireless network that has been

found. If your network is shown proceed to step 14. If it is not shown then proceed to step 12.

If you make a mistake at any point, use the Back button to go back to the previous screen.

If your network is not found, it may be because the router is congured not to broadcast the

SSID. You should then use the Tuning Control Rotary to highlight and select the ‘[Manual

cong]’ option in order to enter the network details manually. This is described in ‘Manual

Network Conguration”. If your network name is being broadcast, and it was not found, then

try re-scanning press the Back button), and if necessary try moving your radio to a location

closer to your access point / router.

When the SSID for the wireless network you wish to connect to is highlighted on the screen,

press the Tuning Control Rotary. If WiFi Pretected Setup (WPS) was indicated, you will see

an additional menu at this point, otherwise proceed to step 14. choose one of the WPS menu

options as required for your router (WPS may be via push button, or using an identication

number).

‘Push Button’ – the display prompts you to press the WPS button on your router and then

the Select button on the radio. The two devices should then connect with the encryption key

sent automatically to the radio.

‘PIN’ – the display shows an identication number which you must enter into your router

using a web browser (refer to your router’s user documentation). You should then press the

Select button on the radio.

‘Skip WPS’ – if you wish to enter the encryption key yourself (or if it was previously Entered).

If you choose Push Button or PIN the screen will then show ‘Connecting…’ and then ‘Setup

wizard completed’. Press the Tuning Control Rotary to exit setup wizard.

SELECT

/SEEK

11-13

BA C K

11,12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sangean WFR-28D in the language / languages: English as an attachment in your email.

The manual is 7,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean WFR-28D

Sangean WFR-28D User Manual - German - 83 pages

Sangean WFR-28D User Manual - Dutch - 83 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sangean WFR-28D Manual

Product: