110399

Sangean WFR-20 Manual

14
Zoom out
Zoom in
Previous page
1/59
Next page
13
Connecting to a wireless network cont.
7. When the ESSID for the access point you want to connect to is
highlighted on the screen, press the Select control.
8. If your network is not configured to need an encryption code,
the screen should say ‘Connecting to network’, then ‘Network OK’.
If this is the case then you have successfully connected your radio
to your network, so please proceed to the section ‘After you have
connected to your network’ on the next page.
9. If the screen displays either ‘Enter WEP key’ or ‘Enter WPA key’,
it is because the network is using one of the encryption systems:
Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA).
You therefore need to enter the correct WEP or WPA key into the
radio to allow it to communicate with your network.
If you do not have the WEP or WPA key, then you should obtain it
from the person who set your network. Some Wi-Fi routers may
come with a key already set up by the supplier, in which case you
should refer to the user documentation provided with it.
WEP keys are 10 or 26 characters long (using 0 - 9, and A - F).
Some Wi-Fi access points can also use pass-phrases for WEP but
these do not conform to a defined standard and are not supported.
WPA keys are usually set up using a pass-phrase of between 8 and
63 characters. Your Internet radio can accept pass-phrases for
WPA keys.
If the WEP or WPA key was previously entered and the radio has not
had a factory reset the display will show ‘Using saved key’ and
should then connect to the network.
10. After 3 seconds, the display goes into the key entry mode. To enter
the key, use the knob to select each character of the key in turn,
pressing the Select control after each character. Remember, WEP
keys only use the numbers 0 - 9 and letters A - F. WPA keys are
sensitive to upper and lower case characters so you must enter
them exactly.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean WFR-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean WFR-20 in the language / languages: English as an attachment in your email.

The manual is 6,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean WFR-20

Sangean WFR-20 User Manual - German - 61 pages

Sangean WFR-20 User Manual - Dutch - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info