797022
6
Zoom out
Zoom in
Previous page
1/19
Next page
GBGB
EE
05
Setting the clock manually
Setting the time format
Scan tuning FM / AM
Press and hold the Menu button to enter the menu setting and then press the Tuning up / down
button to select “Clock”.
Press the Select button to enter the time setting. The hour digit will ash on the display.
Press the Tuning up / down button to set the desired hour. Then press the Select button to conrm
the setting. The minute digit will ash on the display.
Press the Tuning up / down button to set the desired minute and press the Select button to conrm
the setting. Now the month digit will ash on the display.
Follow the steps above to set the month / day / year. When the time and date setting is completed,
the display will show “Saved”.
Press and hold the Menu button to enter the menu setting and then press the Tuning up / down
button to select “12 / 24 hour”.
Press the Select button and press the Tuning up / down button to select 12 or 24 hour format. Press
the Select button to conrm the setting. The selected format is used in standby mode, in playing
mode and when setting the alarms.
Make sure the wire antenna is fully extended in advance.
Press the Power button to switch on your radio.
Press the Band button repeatedly to select the desired frequency band.
To scan up in frequency, press and hold the Tuning up button. Your radio will scan in an upwards
direction (low frequency to high frequency) and stop automatically when it finds a station of
sufcient strength. To scan down in frequency, press and hold the Tuning down button. Your radio
will scan in a downwards direction and stop automatically when it finds a station of sufficient
strength.
After a few seconds the display will update. The display will show the frequency of the signal found.
If the signal is strong enough and there is RDS / RBDS data present then the radio will display the
station name.
1.
2.
3.
4.
5.
1.
2.
1.
2.
3.
4.
5.
When choosing manual setting as the clock time setting of your radio, the “RBDS Auto CT” function
will be disabled.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean SG-114 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean SG-114 in the language / languages: English as an attachment in your email.

The manual is 1.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info