797375
9
Zoom out
Zoom in
Previous page
1/11
Next page
08
GB
Sleep function – Auto Off
The sleep timer will automatically switch off your radio after a preset time has elapsed.
1. Press and continue to hold down the Power button, the display will cycle through the available sleep
times in this order 30-20-10-60-50-40-30………… Release the button when the required sleep time
appears in the display. Display will appear “AUTO OFF” and radio will play the last station selected.
2. To cancel the sleep function, press the Power button, the “AUTO OFF” will disappear and the radio
will switch off.
Nap timer (short timer)
You can set the Nap timer (short timer) when the radio is on or off.
Press and hold the Timer button, the display will appear ( ) and ash last nap timers time. Press the
Tuning Up/Down button to select required nap timers time, press the Timer button again to complete
setting.
Nap timer will start to count by seconds, the display will show ( ) and remaining nap timer time. The
buzzer will sound for 3 minutes when it reaches the period of time which you have set. Press the Power
button to turn the buzzer off.
To turn off the Nap timer before the time is up, press and hold the Timer button again. ( ) will
disappear from display.
You can also set memory for the nap timer’s time by long pressing Preset 1-5 button for the timers time
you require (the same procedure as Storing a station) and recall it whenever you need to set the timer. e.g.
you can store 10 minutes timer in preset 1 and 20 minutes timer in preset 2, so each time after you need
to select short timers time, press and hold the Timer button then press preset 1 button to get 10 minutes
timer and preset 2 button to get 20 minutes timer and so on.
Factory reset
If you wish to completely reset your radio to its initial state this may be performed by following this
procedure. By performing a factory reset, all user entered settings will be erased.
1. Make sure your radio is switched off.
2. Press and hold the Preset button 5 and Band button at the same time for more than 2 seconds, the
“DEF” symbol will appear and ash on the display. Continue holding down these two buttons jointly
until all the icons show on the display. Now the factory reset is completed.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean SG-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean SG-100 in the language / languages: English as an attachment in your email.

The manual is 1.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean SG-100

Sangean SG-100 User Manual - French - 11 pages

Sangean SG-100 User Manual - Spanish - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info