797017
13
Zoom out
Zoom in
Previous page
1/18
Next page
12
Settings in menu
The charger may not supply power to some USB devices.
When not using or after charging, remove the USB cable.
Do not connect power source to USB port. Otherwise there is a risk of re. The USB port is only
intended for charging lower voltage devices.
Do not insert a nail, wire, etc. into the USB power supply port. Otherwise a circuit short may
cause smoke or re.
Do not connect this USB socket with your PC USB port, as it is highly possible that it may cause
breakdown of both units.
Never use the USB socket in rainy or moist conditions to prevent moisture from entering the radio.
IMPORTANT
SNOOZE 5
When the alarm sounds, pressing any button other than the Power button will silence the alarm for
5 minutes. To adjust the silence time for the snooze timer, when the display appears and flashes
“SNOOZE X” in the settings menu, press the Select button to enter the setting. Rotate the Tuning
control knob to adjust the silence time from 5, 10, 15 and 20 minutes for the snooze timer. To cancel
the snooze timer while the alarm is suspended, press the Power button.
12 / 24H (12 hour or 24 hour clock format)
When the display appears and ashes “12 / 24H”, press the Select button to enter the setting. Rotate
the Tuning control knob to select “12H” or “24H”. Press the Select button to conrm12 hour or 24 hour
clock format.
If the 12 hour clock format is chosen, the clock radio will then use the 12 hour clock for the setting of
alarms, and will display a 12 hour clock with an AM or PM indicator on the display.
FACTORY (System reset)
When the display appears and ashes “FACTORY”, press the Select button to enter the setting. Rotate
the Tuning control knob to select “RESET YES” or “RESET NO”. Select “RESET YES” and press the
Select button to reset the radio. It will erase all saved settings and preset memory stations. All settings
will revert to factory default settings.
USB OUT (Charging with USB socket)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean RCR-29 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean RCR-29 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info