797017
8
Zoom out
Zoom in
Previous page
1/18
Next page
07
Press and hold the Power button until you hear a beep to switch on your radio.
Press the Band button as needed until the AM or FM band is selected.
To scan up in frequency, first rotate the Tuning control knob in a clockwise direction and then
press the Tuning control button. Your radio will scan in an upwards direction (low frequency to
high frequency) and stop automatically when it nds a station of sufcient strength. To scan down
in frequency, rst rotate the Tuning control knob in a anti-clockwise direction and then press the
Tuning control button. Your radio will scan in a downwards direction and stop automatically when it
nds a station of sufcient strength.
After a few seconds the display will update. The display will show the frequency of the signal
found. If the signal is strong enough and there is RDS data present then the radio will display the
station name.
When the end of the frequency band is reached your radio will recommence tuning from the
opposite end of the frequency band.
Use the Volume control to adjust the sound level as needed.
To switch off your radio press and hold the Power button until “OFF” appears on the display.
1.
2.
3.
4.
5.
6.
7.
Operating your radio – Search tuning
AM / FM
Press and hold the Power button until you hear a beep to switch on your radio.
Press the Band button as needed until the AM or FM band is selected.
Rotate the Tuning control knob to tune to a station. The FM frequency will change in steps of
100kHz / 50kHz and AM frequency will change in steps of 10kHz / 9kHz.
When the end of the waveband is reached your radio will recommence tuning from the opposite
end of the frequency band.
Use the Volume control to adjust the sound level as needed.
1.
2.
3.
4.
5.
Manual tuning – AM / FM
If your radio has any interference in the AM band because of its AC adaptor, please move your
radio away from the AC adaptor at least 12”.
NOTE
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean RCR-29 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean RCR-29 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info