797013
81
Zoom out
Zoom in
Previous page
1/84
Next page
80
GB
Accessing your audio les via a UPnP server using
Windows Vista and XP
If your computer is running Windows Vista or XP, then Windows Media
Player version 11 includes a UPnP server which will make your files
available to your radio. There are other UPnP server solutions available
for non-Windows users and for Windows users who may wish to use an
alternative (see the section of Use with Windows, Apple Mac and Linux).
It is beyond the scope of this instruction book to cover all possible
options for UPnP. We explain the use of Microsoft's Windows Media
Player here since that will be the rst choice for the majority of users.
Set up UPnP access on a Windows PC
1. If your PC is running Microsoft Windows Vista or Windows XP then
you can use Microsoft's Windows Media Player version 11 to act as
your UPnP (Universal Plug and Play) media server. If not already
installed on your PC, Windows Media Player 11 may be downloaded
from Microsoft’s web site and installed by following the instructions
detailed in its installation wizard, or by using Microsoft's Windows
Update facility.
2. Once installed, Windows Media Player 11 can create a library from
all the media les available to it on your PC. To add new media les
to the library, select the 'Library' tab, then 'Add to Library… > Advanced
Options', click 'Add', choose the les you wish to add and click ‘OK’.
The next step is to connect your radio to Windows Media Player 11
and to congure the program to allow the radio to access your media
library.
3. Press the Standby button to switch the unit on. Then press the Mode
button and press the Tuning buttons as needed until the Music Player
mode display is shown. Press the Select button to select the option.
The main 'Music Player' menu will then be displayed.
Set up UPnP access on a Windows PC - cont.
Press the Tuning buttons until 'Shared media' is highlighted and
press the Select button. The radio will scan for all available UPnP
servers. It may take a few seconds for the radio to complete its scan.
The radio will display '<Empty>' if no UPnP servers are found.
After scanning, select your UPnP server. If you are using WMP 11
as the server, your radio will then normally display 'Unauthorized -
Select to retry' at this stage.
Your PC may prompt you that there has been a connection to your
UPnP server. Whether prompted or not, in order that the radio may
access the music les, you will need to click the 'Library' tab in WMP
11 and select the 'Media Sharing…' item to open the 'Media Sharing'
window. Make sure the box 'Share my media to:' is ticked.
In the 'Media Sharing' window, the radio will be listed as an unknown
device. Click on the unknown device shown to select it, then click the
'Allow' button and then click 'OK'.
Note:
If you are using Microsoft Windows' rewall software, this should be
correctly congured by WMP 11. If you are using third party rewall
software you may need to manually congure it to allow your unit and
WMP 11 to communicate.
On the radio, select the named server again. If WMP 11 is now able
to communicate with your radio you will be presented with some
media selection options on the display.
4.
5.
6.
7.
8.
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean RCR-11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean RCR-11 in the language / languages: English as an attachment in your email.

The manual is 4.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean RCR-11

Sangean RCR-11 User Manual - German - 84 pages

Sangean RCR-11 User Manual - Dutch - 84 pages

Sangean RCR-11 User Manual - French - 84 pages

Sangean RCR-11 User Manual - Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info