Manual Sangean PRD4 (page 8 of 71) (English, German, Dutch, French, Spanish)

110414

Zoom out

Zoom in

1/71

Manual tuning/station searching

1. Press the Power button to turn on the radio.

2. Select the required waveband by pressing the Band button.

Adjust the antenna as described above .

3. A single press on either the Tuning up or down button will change

the frequency in the following increments:

FM: 50 or 100 kHz

MW: 9 or 10 kHz

4. Press and hold either Tuning Up or Down button until the frequency

in the display begins to change rapidly. Release the button.

Your radio will search the selected waveband and stop

automatically when it finds a station of sufficient strength.

5. Rotate the Volume control to get required sound level.

6. To turn off the radio, press the Power button.

Display will show OFF.

Storing stations in preset memories

There are 5 memory presets for each waveband.

1. Press the Power button to turn on the radio.

2. Tune to required station using one of the methods

previously described.

3. Press and hold down the required preset until the radio beeps.

The preset number will appear in the display and the station will

be stored under chosen preset button.

4. Repeat this procedure for the remaining presets.

5. Stations stored in preset memories can be overwritten by

following above procedures.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sangean PRD4 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sangean PRD4 Manual

Product: