110413
9
Zoom out
Zoom in
Previous page
1/31
Next page
Storing stations in preset memories
There are 5 memory presets for each waveband.
1. Press the Power button to turn on the radio.
2. Tune to the required station using one of the methods previously
described .
3. Press and hold down the required preset for until the radio
beeps (greater than 2 seconds). The preset number will appear
in the display and the station will be stored under the chosen
preset button.
4. Repeat this procedure for the remaining presets.
5. Stations stored in preset memories may be overwritten by
following above procedure.
Recalling stations from preset memories
1. Press the Power button to turn on the radio.
2. Select the required waveband by repeatedly pressing the band
button.
3. Momentarily press the required Preset button, the preset
number and station frequency will appear in the display.
Setting the radio alarm
When the radio alarm is selected, the radio will turn on and play
the last station listened to. The radio alarm will sound for one hour
unless turned off by pressing the Power button. Press the Power
button whilst the alarm is sounding will cancel the alarm for 24
hours.
1. The radio alarm time can be set with the radio switched off.
2. Press and hold down the alarm radio button (preset no. 5) until
the hour digits and alarm symbol flash in the display
followed by a beep tone.
3. Set the required hour using the Tuning up/down buttons.
4. Press the alarm radio button, the minute digits will flash in the
display.
5. Set the required minute using the Tuning up/down buttons.
6. Press the alarm radio button, display will flash alarm lasting
time (from 1 hour to 4 hours) to be set for radio alarm. Using
Tuning up/down to select required alarm lasting hours then
press the alarm radio button again to complete alarm radio
setting.
7. To permanently cancel the alarm radio, press the alarm radio
button until symbol is removed from the display.
8
GB
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean PRD2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean PRD2 in the language / languages: English, Spanish as an attachment in your email.

The manual is 2,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info