797370
8
Zoom out
Zoom in
Previous page
1/11
Next page
07
GB
F
E
Setting the weather alert
1. Follow the steps above to tune to the required weather station.
2. Press and hold the WX Alert button until the symbol appears on the display to activate the weather alert
function. Continuously press and hold the WX Alert button, this will cycle through the required ON-2H-4H-8H-16H
of alert time. “ON” indicates that the weather alert function is always on. Release the WX Alert button when the
required alert time is chosen. The Weather Alert LED indicator will light red with 5 second interval. Then the radio
will be put into weather alert standby mode.
When the radio is set to the weather alert mode, all the buttons on the panel will be invalid.
NOTE
3. If NOAA issues a weather related emergency, the radio will automatically alert you with a siren continuing for 1
minute and the symbol and the weather alert red LED will both blink if you do not press any button. After
1 minute of siren, your radio will play the selected weather channel broadcast automatically for 12 minutes. Then
the radio will be put into weather alert standby mode.
4. When the siren is active, pressing any button on the radio instantly turns the radio to the selected weather
broadcasting and cancels the siren. The symbol and the weather alert red LED will stop ashing. To stop
playing the selected weather broadcasting, press the Power button. Then the radio will be put into weather alert
standby mode.
Turning off the weather alert function
Press and hold the WX Alert button until “OFF” is shown on the display to turn off the weather alert function. The
symbol will disappear on the display.
Setting the alarm
Your radio has two types of alarms which can be set to wake you with AM / FM radio or buzzer alarm. Ensure that
the time setting is complete before setting the alarm time. The alarms can be set while the unit is off or while playing.
Alarms will be retained in the event of a power failure.
Setting the radio alarm
1. Press and hold the radio alarm button until the radio alarm symbol ashes on the display followed by two
beeps.
2. Rotate the Tuning control knob to select the desired hour and press the Select button to conrm the hour setting.
3. Rotate the Tuning control knob to select the desired minute and press the Select button to conrm the minute
setting. The radio alarm setting is now completed. The active radio alarm symbol is shown on the display. The
radio alarm is set to the station last listened to.
The radio alarm will automatically switch to buzzer alarm when the selected radio alarm station signal is too
weak.
NOTE
4. To quick change the On / Off status of the radio alarm, press and release the radio alarm button.
Setting the buzzer alarm
1. Press and hold the buzzer alarm button until the buzzer alarm symbol ashes on the display followed by
two beeps.
2. Rotate the Tuning control knob to select the desired hour and press the Select button to conrm the hour setting.
3. Rotate the Tuning control knob to select the desired minute and press the Select button to conrm the minute
setting. The buzzer alarm setting is now completed. The active buzzer alarm symbol is shown on the display.
4. To quick change the On / Off status of the buzzer alarm, press and release the buzzer alarm button.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean PR-D12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean PR-D12 in the language / languages: English as an attachment in your email.

The manual is 1.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info