797010
18
Zoom out
Zoom in
Previous page
1/21
Next page
17
Nap timer
1. Press and hold the Nap timer button to enter the adjustment mode.
2. Rotate the Tuning control knob to select your desired Nap time (1-120
minutes).
3. Press the Tuning control knob to conrm the setting. ‘NAP’ symbol
will show on the display.
4. To view the remaining time of an active timer setting, press the Nap
timer button. To cancel a sounding Nap timer, press the Standby
button. If any button other than the Standby button is pressed when
the alarm is sounding, snooze function will be activated. To cancel
the function when countdown is progressing, go to nap timer setting
menu and select ‘Off’.
5. You can view or change the On/Off status of the Nap timer by
pressing the Nap timer button.
Tone control- treble and bass
You can set up a custom treble and bass setting to your liking.
1. Make sure your radio is turned on. Press the Volume control knob to
enter the bass adjustment mode.
2. Rotate the Volume control knob until the desired level (between -5
and +5) is displayed. The sound will change as you adjust the level.
Press the Volume control knob to conrm the setting. You will enter
the treble adjustment mode.
3. Rotate the Volume control knob until the desired level (between -5
and +5) is displayed. Press the Volume control knob to conrm the
treble setting.
Loudness
You can get compensation on lower and higher frequency for your radio
by adjusting the Loudness function.
1. Repeatedly pressing the Menu button until ‘Loudness’ is shown on
the display.
2. Rotate the Tuning control knob to select ‘On’ to turn on the loudness
function or ‘Off’ to turn off the function.
3. Press the Tuning control knob to conrm the setting.
Contrast
The contrast of the display can be adjusted.
1. Repeatedly pressing the Menu button until ‘Contrast’ is shown on the
display.
2. Rotate the Tuning control knob to adjust the contrast. The contrast
level indication on the screen will change at the same time. When
you find the setting that gives the best legibility for the location in
which the radio is used, press the Tuning control knob to save the
setting.
Language
Your radio can be congured to a different language.
1. Repeatedly pressing the Menu button until ‘Language’ is shown on
the display.
2. Rotate the Tuning control knob to select your required language.
3. Press the Tuning control knob to conrm your selection. The display
will change to the chosen language.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean HDR-18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean HDR-18 in the language / languages: English as an attachment in your email.

The manual is 1.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info