797010
9
Zoom out
Zoom in
Previous page
1/21
Next page
8
GB
Auto clock set mode
1. Repeatedly press the Menu button until ‘Clock Update’ is shown on
the display.
2. Rotate the Tuning control knob to select ‘Auto’ and press the Tuning
control knob to confirm the setting. Your radio will synchronize its
clock time whenever it tunes to a radio station using RDS with CT
signals.
Setting the time format
1. Repeatedly press the Menu button until ‘Set 12/24 hour is shown on
the display.
2. Rotate the Tuning control knob to select 12 or 24 hour format. The
selected format is used in standby mode, on the playing mode screen
and when setting the alarms.
Operating the radio
This radio is equipped with four tuning methods – Scan tuning, Manual
tuning, Memory presets recall and Direct Entry.
Scan tuning FM / AM
1. Make sure the FM antenna is set up in advance and internal or
external switch is selected.
2. Press the Standby button to switch on your radio.
3. Press the Band button repeatedly to select the desired frequency
band.
4. To scan up in frequency, first rotate the Tuning control knob in a
clockwise direction and then press the Tuning control knob. Your
radio will scan in an upwards direction (low frequency to high
frequency) and stop automatically when it nds a station of sufcient
strength. To scan down in frequency, rst rotate the Tuning control
knob in a anti-clockwise direction and then press the Tuning control.
Your radio will scan in a downwards direction and stop automatically
when it nds a station of sufcient strength.
5. After a few seconds the display will update. The display will show the
frequency of the signal found. If the signal is strong enough and there
is RDS/RBDS data present then the radio will display the station
name.
Manual tuning – FM / AM
1. Press the Standby button to switch on your radio.
2. Press the Band button repeatedly to select the desired frequency
band.
3. Rotate the Tuning control knob to tune to a station. The frequency will
change in steps of 50kHz/100kHz/200 kHz in FM or 9 kHz/10 kHz in
AM.
4. When the frequency band end is reached the radio will recommence
tuning from the opposite frequency band end.
5. Adjust the Volume control to the desired volume settings.
6. To switch off your radio press the Standby button.
Note:
If your radio has any interference in the AM band because of its
adaptor, please move your radio away from its AC adaptor at least 12”.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean HDR-18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean HDR-18 in the language / languages: English as an attachment in your email.

The manual is 1.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info