797009
5
Zoom out
Zoom in
Previous page
1/19
Next page
GBGB
EE
04
If the clock time was not auto adjusted within 24 hours, the symbol “CT” will disappear on the display.
If the clock time from local RDS / RBDS station is not correct, you should consider disabling the
“RBDS Auto CT” function and set the time using the manual setting.
Please note that at times the RDS / RBDS signal may broadcast the wrong time, this is the fault
of the radio station and not your radio.
Using the AC power adaptor
Auto clock set mode
The AC power adaptor required for this unit should be 6 volts DC at 2A center pin positive. Insert
the adaptor plug into the DC socket on the rear of the radio. Plug the adaptor into a standard AC
outlet. If no time is displayed, the screen will show ----:----. The AC adaptor should be disconnected
from the AC outlet when not in use for long periods of time.
Fully extend the wire antenna located on the rear of your radio.
Press and release the Power button to switch on your radio. It may be necessary to relocate your
radio to get better reception.
Press the Power button to switch on your radio.
Press the Band button to select FM radio mode.
Press and hold the Menu button for 2 to 3 seconds then release to enter the menu setting and then press
the Tuning up / down button to select “RBDS Auto CT”. Press the Select button to enter the setting.
Press the Tuning up / down button to select “Auto” or “Manual”. With “Auto” selected, press the
Select button to conrm the setting. Your radio will synchronize its clock time whenever it tunes
to a radio station using RDS / RBDS with CT signals. The symbol “CT” will appear on the display
indicating the radio time is RDS / RBDS clock time.
If you wish to cancel the “RBDS Auto CT” function, select “Manual” and press the Select button to
conrm the setting. Please refer to the next section “Setting the clock manually” to set the clock
time and date.
1.
2.
3.
1.
2.
3.
4.
5.
1.
2.
3.
The display will revert to a conventional time display 10 seconds after
the last button press except when displaying scrolling text.
NOTE
NOTE
The AC adaptor is used as the means of connecting the radio to the power supply. The AC Adapter
used for the radio must remain accessible during normal use in order to disconnect the radio from the
power supply completely, the AC Adaptor should be removed from the power supply outlet completely.
IMPORTANT
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean HDR-15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean HDR-15 in the language / languages: English as an attachment in your email.

The manual is 1.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info