797362
13
Zoom out
Zoom in
Previous page
1/20
Next page
12
GB
F
E
NL
D
3. Rotate the Tuning control knob to select “On” or “Off”. To activate the traffic announcement
function,select“On”.PresstheTuningcontrolknobtoconrmthesetting.Todisablethisfunction,
select“Off”.PresstheTuningcontrolknobtoconrmthesetting.
DAB service following function
If the reception quality of the programme being received decreases, the Gotune can automatically
tune to the programme in another ensemble (if available). For this feature to work, the service
following function must be activated.
Press the SF button to switch service following on / off. The “S/F” symbol on the display shows that
the service following function is activated.
Alternative you can set it in the DAB menu.
1. When in DAB mode press and hold the Info / Menu button to enter the DAB menu list.
2. RotatetheTuningcontrolknobtond“ServiceFollowing”.PresstheTuningcontrolknobtoenter
the setting.
3. Rotate the Tuning control knob to select “On” or “Off”. To activate service following, select “On”.
Press the Tuning control knob to confirm the setting. The “S/F” will appear on the display. To
disablethisfunction,select“Off”.PresstheTuningcontrolknobtoconrmthesetting.The“S/F”
will disappear on the display.
Presets in DAB and FM Tx modes
There are 10 memory presets each for DAB radio and FM transmitter. They are used in the same
way for each operating mode.
1. Press the Power On / Off button to switch on your GoTune.
2. Tune to the required radio station / frequency as previously described.
3. Press and hold the Preset button to enter the “Preset Store” menu. Rotate the Tuning Control
knob to scroll through the preset list until you reach an unused preset or a preset that you wish
to change. Press and release the Tuning Control knob to store the preset. “Preset 1 Stored” (for
example) will be shown on the display. The corresponding preset number e.g.“P1” will show on
the display. Repeat this procedure for the remaining presets.
4. Stations which are already stored in the presets may be over written by following the above procedure.
Recall a preset in DAB and FM Tx modes
1. Press the Power On / Off button to switch on your GoTune.
2. Press the Mode button to select the required operating mode.
3. Press and release the Preset button to display the ‘Preset Recall’ menu. Rotate the Tuning Control
knob to select the desired preset station / frequency. Press and release the Tuning Control knob.
Your GoTune will then tune to the station / frequency stored in the selected preset memory.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean FMT-02 - Bluetooth In-Car Adapter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean FMT-02 - Bluetooth In-Car Adapter in the language / languages: English as an attachment in your email.

The manual is 1.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean FMT-02 - Bluetooth In-Car Adapter

Sangean FMT-02 - Bluetooth In-Car Adapter User Manual - German - 20 pages

Sangean FMT-02 - Bluetooth In-Car Adapter User Manual - Dutch - 20 pages

Sangean FMT-02 - Bluetooth In-Car Adapter User Manual - French - 21 pages

Sangean FMT-02 - Bluetooth In-Car Adapter User Manual - Spanish - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info