567062
18
Zoom out
Zoom in
Previous page
1/104
Next page
17
In most installations the DNS settings (DNS = Domain Name Server) will be set to the same
IP address as your router. In this case the secondary DNS may be left at zero. To enter the
DNS address, press the Folder Up or Down buttons on the remote control to set the value
for each group of digits and then press the Select button or the Left or Right buttons (on
the remote control) to enter the value and to move on to the next group. Repeat this until all
eight groups of digits have been entered. If you previously specied ‘Wired’ and then ‘DHCP
disable’, your radio should now connect to the router using the Ethernet cable (in which case
skip to step 11).
If you specied ‘Wireless’, the next step is to set up the WiFi connection, starting with the
name of the wireless network (SSID) followed by the encryption options and password.
To enterthe SSID, characters are selected and entered using the Folder Up or Down, Left
or Right on the remote control and Select buttons. The radio scrolls through the available
characters as well as the three controls on the right. The character currently highlighted will be
entered when you press theSelect button.
Do this as needed until the complete network name has been entered. The SSID setting is
sensitive to upper and lower case characters and symbols. You must enter it exactly as set up
in your router. The three controls on the right-hand side of the screen have special functions.
You can quickly access these by pressing the Info button and then use the Folder Up or Down
and Select buttons on the remote control as needed:
select ‘ ’ to erase a character just entered (long press to clear); Info again to continue
select ‘ ’ when the complete SSID has been entered
select ‘ ’ to cancel and go back to the DNS settings screen
Having entered the SSID, you must enter details of the encryption system used on your
wireless network. This should be the same as specied in your router settings. If your network
does not use encryption, then select the ‘Open’ option. Your radio should then connect to the
network, so skip to step 11. If your network uses WEP (Wired Equivalent Privacy) select the
‘Pre-Shared Key’ option then go to step 8. The remaining options are for WPA or WPA2 (WiFi
Protected Access) – see step 9.
If you chose Pre-Shared Key’ in step 7, you should then choose the WEP option. The
key should be entered using only the numbers 0-9 and the letters A-F. The key will be 10
characters long for 64-bit encryption and 26 characters long for 128-bit encryption. The radio
willaccept lower-case letters a-f as equivalent to upper-case A-F. Spaces or special symbols
are not permitted in WEP keys.
5.
6.
7.
8.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean DDR-62 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean DDR-62 in the language / languages: English as an attachment in your email.

The manual is 9,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean DDR-62

Sangean DDR-62 User Manual - German - 104 pages

Sangean DDR-62 User Manual - Dutch - 104 pages

Sangean DDR-62 User Manual - French - 104 pages

Sangean DDR-62 User Manual - Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info