797007
11
Zoom out
Zoom in
Previous page
1/27
Next page
GB
10
Scan sensitivity setting - FM
Your radio includes a local/distant option for the auto-scan function. By setting the radio to the
‘local’ scan option, weaker signals from more distant transmitters can be ignored by the radio,
makingstrongersignalseasiertond.
1. Press and release the Standby button to switch on your radio.
2. If needed, press and release the Mode button until the FM band is selected.
3. Press and hold the Menu button until the Advanced FM menu shows on the display.
4. Rotate the Tuning control until ‘FM Scan Zone’ shows on the display. Press and release the
Select button to enter the scan sensitivity adjustment mode. The current setting will be marked
with an asterisk.
5. Rotate the Tuning control to switch between ‘Local’ (Strong stations only) and ‘Distant’ (All
stations)optionsonthelowerlineofthedisplay.TheDistantoptionwillallowtheradiotond
weaker signals when scanning.
6.PressandreleasetheSelectbuttontoconrmyourselection.TheLocalorDistantsettingis
stored in the radio and remains in force until changed or until a System Reset.
Presetting stations - DAB and FM
You may store your preferred DAB and FM radio stations to the preset station memories. There
are 20 memory presets in your radio 10 for DAB and 10 for FM. Presets are remembered by your
radio in the event of a power failure.
The procedure for setting presets and using them to tune stations is the same for FM and DAB
modes, and is described below. Please note that 10 memory presets for each band can be
accessed via remote control.
1. Press the Standby button to switch on the radio.
2. Tune to the required station as previously described.
3. Press and hold down the required Preset button until the display shows, e.g. “Preset 1 stored.”
The station will be stored under the chosen preset number. Repeat this procedure for the
remaining presets.
Note: Stations stored in preset memories may be overwritten by following the above procedure.
Recalling a preset station- DAB and FM
1. Press the Standby button to switch on the radio.
2. Press and release the required waveband by pressing the Mode button.
3. Momentarily press and release the required Preset button, your radio will tune to the station
in preset memory.
Note: The display will show ‘Preset Empty’ if no station has been stored to that preset.
FM
<FM Scan Zone >
FM Scan Zone *
<Distant >
FM Scan Zone
<Local >
Preset 1
Stored
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean DDR-60BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean DDR-60BT in the language / languages: English as an attachment in your email.

The manual is 3.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean DDR-60BT

Sangean DDR-60BT User Manual - German - 27 pages

Sangean DDR-60BT User Manual - Dutch - 27 pages

Sangean DDR-60BT User Manual - French - 27 pages

Sangean DDR-60BT User Manual - Spanish - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info