567082
13
Zoom out
Zoom in
Previous page
1/36
Next page
12
GB
Operating your radio – FM auto-tune
1. Fully extend the aerial located on the rear of your clock radio. Place
the antenna so that it is an straight as possible, extending either above
the radio.
2. Press and release the On/StandBy button to switch on your clock radio.
3. Press and release the Band button to select the FM band.
4. Press and release the Auto Tune button, display will show scanning
and your clock radio will scan from low frequency to high frequency
(or in the direction last scanned). It will stop automatically when it
nds a station of sufcient strength.
5. After a few seconds the display will update. The display will show the
frequency of the signal found. If the signal is strong enough and there
is RDS data present then the radio will display the station name.
6. To nd additional stations, press and release the Auto Tune button
as before.
7. To scan the FM band in a upward or downward direction (low frequency
to high frequency or high frequency to low frequency), i.e. clockwise
or counter-clockwise, press and hold down the Tuning Up or Down
buttons for 0.5 seconds and then release the Tuning Up or Down
buttons to tune to a station, and then press and release the Auto Tune
button, the frequency will continue following the last Tuning Up or
Down buttons in a upward or downward direction.
8. Adjust the Volume Up or Down buttons to the required setting.
9. To switch off your clock radio press and release the On/Standby button.
Manual tuning – FM
1. Press and release the On/StandBy button to switch on your clock radio.
2. Press and release the Band button to select the FM band.
Carefully extend the telescopic aerial fully for FM reception.
3. Press the Tuning Up or Down buttons to tune to a station. With each
click of the control the frequency will change up or down by 50 kHz.
4. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
5. Set the Volume Up or Down buttons to the desired settings.
6. To switch off your clock radio press and release the On/StandBy button.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean DDR-31BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean DDR-31BT in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean DDR-31BT

Sangean DDR-31BT User Manual - German - 36 pages

Sangean DDR-31BT User Manual - Dutch - 36 pages

Sangean DDR-31BT User Manual - French - 36 pages

Sangean DDR-31BT User Manual - Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info