110306
8
Zoom out
Zoom in
Previous page
1/14
Next page
3.Press the button marked M (memory), display M and suggested preset number
will flash, press ENTER to store your station in that memory position.
4.Preset positions may be exchanged easily. Select preset station that is to be
changed, press memory button ( M and existing memory position will flash).
select new preset position. Preset will be exchanged automatically.
5.SW band has 18 presets (in two pages).When presets 1-9 are full, press PAGE
button to select Page 2. Display will show M2. and an additional 1-9 presets can
be set for a total of 18 presets.
Note:
1. If all presets have been used, pushing M button will display FULL on LCD.
If you still desire to store new station, push any button of 1-9 where new station
is to be stored and hold for more than 2 seconds. New station will be put into
memory in position selected and original station in this position will be replaced.
2. All preset stations are indicated by on the display. If a station has already
1. Turn on the radio by pressing the POWER on/off button.
2. Select the waveband for the station required.
3. Press the numbered button corresponding to the preset memory location for the
required station. The radio will instantly tune to the station and display will show
its frequency and memory location.
1.Turn on the radio by pressing the POWER on/of button.
2.Press BAND button to select the SW waveband.
3.Press SW SELECT button to select the required SW meter band, display will
appear low end frequency and SW meter band it belongs to. This radio covers
SW 120 to 11 meter band.
This radio provides an easy to use feature called APS (Auto Preset System) which
operated on FM, MW and LW bands.
1.Turn on the radio by pressing POWER on/off button.
2.Press BAND button to select the required waveband.
been put into the memory. it will show preset position on display.
Recalling a station
Select Short Wave Meter Band
APS (auto Preset System)
7
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean ATS505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean ATS505 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info