797034
15
Zoom out
Zoom in
Previous page
1/19
Next page
14
GB
F
E
NL
D
the available settings and to select settings, while the
Step button (17) or Enter button (30) can be used start
configuring settings or confirm selected settings.
The following settings can be found in the menu:
MANUAL
/ RDS CT
[RDS CT]: Set the clock using RDS CT
when available.
[MANUAL]*: Set the clock manually and
ignore RDS CT.
FORMAT
[24H]*: Use the 24-hour clock format.
[12H]: Use the 12-hour clock format with
PM indicator.
BACK LIGHT
[LIGHT 10S]: backlight timeout 10
seconds.
[LIGHT 20S]*: backlight timeout 20
seconds.
[LIGHT 30S]: backlight timeout 30
seconds.
Use this setting to configure the
backlight timeout when using battery
power.
FM STEREO
[FM.ST AUTO]*: Use FM stereo mode
when available
[FM.ST MONO]: Force the radio to use
FM mono mode.
Use this setting to allow for stereo
playback (when headphones or an
external device are connected) or force
mono playback. Forcing mono can
sometimes help reduce noise.
SOFT MUTE
[S. MUTE ON]: FM softmute enabled.
[S. MUTE OFF]*: FM softmute disabled.
Softmute can reduce background hiss /
noise of fading FM signals.
MEMOBANK
A / B / C
[MEMOBANK A]*: Select memory bank
A.
[MEMOBANK B]: Select memory bank
B.
[MEMOBANK C]: Select memory bank
C.
The ATS-909X2 features 3 memory
banks each capable of storing 558
preset stations. Use all 3 of them to
store up to 1674 preset stations.
FM STEP
[FM 50kHz]: Tuning Up / Down button
FM tuning step 50kHz.
[FM 100kHz]*: Tuning Up / Down button
FM tuning step 100kHz.
[FM 200kHz]: Tuning Up / Down button
FM tuning step 200kHz.
FM RANGE
[FM 64-108 M]: Set the FM range to 64-
108 MHz.
[FM 76-108 M]: Set the FM range to 76-
108 MHz.
[FM 87-108 M]: Set the FM range to 87-
108 MHz.
This setting can be used to configure
the FM range, based on the country that
you are currently in.
SSB STEP
[SSB 10Hz]: Tuning Up / Down button
SSB tuning step 10Hz.
[SSB 20Hz]*: Tuning Up / Down button
SSB tuning step 20Hz.
BEEP ON /
OFF
[BEEP ON]: Turn on the confirmation
beep for certain operations.
[BEEP OFF]: Turn off the confirmation
beep for certain operations.
SCAN
DELAY
[P.SCAN 0.5S]: Set the page scan delay
to 0.5s.
[P.SCAN 1.0S]*: Set the page scan
delay to 1.0s.
[P.SCAN 1.5S]: Set the page scan delay
to 1.5s.
[P.SCAN 2.0S]: Set the page scan delay
to 2.0s.
This setting can be used to configure the
page scan delay for the AIR band. This
is the time the radio waits for a signal
on a preset frequency (when no signal
is being received) before continuing a
page scan.
VER XXX
This setting displays the software
version. The software version is only for
reference and cannot be changed.
FACTORY
[RESET NO]*: Do not perform a factory
reset.
[RESET YES]: Perform a factory reset.
A factory reset restores the clock time
/ alarm / menu settings to the factory
defaults. Preset stations and memory
banks will not be deleted.
Note: The default settings are indicated with an asterisk
(*).
7. OTHER FEATURES
USING ALARM TIMERS
SETTING AN ALARM TIMER
The ATS-909X2 features three alarm timers which can be
set when the radio is powered on or off using the timer
buttons (5). The alarm timers can be configured to use
either the radio's buzzer or a radio station to wake you up.
To set an alarm timer, follow these steps:
1. Press one of the timer buttons (5).
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean ATS-909X2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean ATS-909X2 in the language / languages: English as an attachment in your email.

The manual is 2.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean ATS-909X2

Sangean ATS-909X2 User Manual - German - 20 pages

Sangean ATS-909X2 User Manual - Dutch - 21 pages

Sangean ATS-909X2 User Manual - French - 21 pages

Sangean ATS-909X2 User Manual - Spanish - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info