735896
58
Zoom out
Zoom in
Previous page
1/72
Next page
English
Troubleshooting
English58
Problem Action
Excessive suds.
Make sure you use the recommended types of detergent as appropriate.
Use high efficiency (HE) detergent to prevent oversudsing.
Reduce the detergent amount for soft water, small loads, or lightly soiled
loads.
Non-HE detergent is not recommended.
Cannot add additional
detergent.
Make sure the remaining amount of detergent and fabric softener is not
over the limit.
Stops.
Plug the power cord into a live electrical outlet.
Check the fuse or reset the circuit breaker.
Close the door, and tap and hold to start the washing machine. For your
safety, the washing machine will not tumble or spin unless the door is
closed.
Before the washing machine starts to fill, it will make a series of clicking
noises to check the door lock and will do quick drain.
There may be a pause or soak period in the cycle. Wait briefly, and the
washing machine may start.
Make sure the mesh filter of the water supply hose at the water taps is not
clogged. Periodically clean the mesh filter.
If the washing machine is not supplied with sufficient power, the washing
machine will temporarily not drain or spin. As soon as the washing machine
regains sufficient power, it will operate normally.
Fills with the wrong
water temperature.
Fully open both taps.
Make sure the temperature selection is correct.
Make sure the hoses are connected to the correct taps. Flush water lines.
Make sure the water heater is set to supply a minimum of 49 °C hot water
at the tap. Also, check the water heater capacity and recovery rate.
Disconnect the hoses and clean the mesh filter. The mesh filter may be
clogged.
While the washing machine fills, the water temperature may change
as the automatic temperature control feature checks incoming water
temperature. This is normal.
While the washing machine fills, you may notice just hot and/or just cold
water going through the dispenser when cold or warm temperatures are
selected. This is a normal function of the automatic temperature control
feature as the washing machine determines the water temperature.
Load is wet at the end of
a cycle.
Use the High or Extra High spin speed.
Use high efficiency (HE) detergent to reduce oversudsing.
Load is too small. Small loads (one or two items) may become unbalanced
and not spin completely.
Make sure the drain hose is not kinked or clogged.
Untitled-4 58 2020-08-28  3:05:08
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung WW10T734 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung WW10T734 in the language / languages: English as an attachment in your email.

The manual is 12,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung WW10T734

Samsung WW10T734 User Manual - German - 76 pages

Samsung WW10T734 User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info