Focus
The memory camcorder usually focuses on a subject automatically (auto-focus).
You can also manually focus a subject depending on the recording conditions.
item contents
on-screen
display
"Auto"
This memory camcorder automatically focuses a subject at the centre of screen (auto-
focus). When the memory camcorder is turned on, auto-focus will always be set.
None
"Manual"
Manual focusing may be necessary under certain conditions that make automatic
focusing diffi cult or unreliable.
Focusing manually during recording
This memory camcorder automatically focuses a subject from close-up to infi nity.
However, the correct focus may not be obtained depending on the recording
condition. In this case, use the manual focus mode.
1. Select "Focus" to "Manual".
The manual focus adjustment indicator appears.
2. Use the zoom lever to zoom in on subject.
3. Press the Control button ( / ) to adjust the focus,
while viewing the subject on the LCD screen.
Focusing on a further subject
To focus on a further subject, press the Control button ( ).
Focusing in a nearer subject
To focus on a nearer subject, press the Control button ( ).
•
•
•
The focus also can be set in the shortcut menu.
➥
page 29
EASY. Q mode automatically sets the "Focus" to "Auto".
Be sure to zoom in on your subject before manually focusing on it.
If you bring the subject into focus at the "W" control side, focus will be faulty when you turn
the zoom lever to the "T" control side to zoom in on the subject.
•
•
•
Manual focus is recommended in the following situations :
a. A picture containing several objects, some close to the
memory camcorder, others further away.
b. A person enveloped in fog or surrounded by snow.
c. Very shiny or glossy surfaces like a car.
d. People or objects moving constantly or quickly like an athlete or a crowd.
<Further subject ><Nearer subject >
STBY 00:00:00/00:58:00
120
MIN
Manual Focus
