39045
20
Zoom out
Zoom in
Previous page
1/25
Next page
GB
35
GB
34
The tape counter:
Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
Is reset when a cassette is inserted in the VCR
Allows you to find the beginning of a sequence easily
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1 Insert a cassette in your VCR.
2 To set the tape counter to zero at the beginning of a sequence:
Press DISP./ or DISPLAY twice to display the counter
Press CLR/RST when you want to set the tape counter to
zero
3 When you are ready,
Start playback or Recording.
Press the
button.
To fast-froward or rewind to the sequence at which the
counter was set to zero, press
or
.
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 16).
Press DISP./ or DISPLAY:
Once to display the current function, programme number,
recording speed, date, time and counter
Twice to display the counter only
Three times to display the time remaining on the cassette
Four times to clear the display
Using the Tape Counter
VIDEOPLUS+ EXTEND
(SV-245B/SV-243B Only)
To prevent delays or over-runs the VCR has a function called
Videoplus EXTEND allowing you to extend the recording time by
up to 60 minutes.
Only use if PDC is not available or set to OFF.
1 Press the MENU button on the remote control.
2 Press the corresponding
$
,
or
,
buttons to select the
EASY OPERATION option.
3 Press the OK button to select this option.
Result
: The
EASY OPERATION menu is displayed.
4 Press the corresponding
$
or
buttons, until the
VIDEOPLUS EXTEND option is selected.
5 Press
or
buttons to set the Videoplus EXTEND time by
increments of 10 minutes.
6 To turn off, press
or
buttons repeatedly until OFF shows.
EASY OPERATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
$❷!!
➛❿!!
OK END:MENU
PDC/VPS DEFAULT :OFF
VIDEOPLUS EXTEND :OFF
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
$
END:MENU
BONUS
BONUS
0:00:00
CLR/RST F.ADV INDEX
A.TRK IPC INPUT
REPEAT
TRK PROG
AUDIO DISPLAY
2
2
Programme VPS/PDC is a system of telling the VCR when a
programme actually starts. Typically, when you want to record a
programme you will tell the VCR to start recording, probably, five
minutes before the advertised starting time of the programme and
to finish ten minutes or so after the programme is due to finish. So
even if the programme starts early or finishes late you will normally
still get to see what you wanted to record. However when live
programmes over-run or the day’s television schedule is changed
from that advertised, you may miss the desired programme which
may have been delayed or even cancelled. With VPS/PDC the VCR
will wait until the signal is sent to confirm the programme is
starting and the VCR will record the programme even if it is two or
more, hours late.
1 Press the MENU button on the remote control.
2 Press the corresponding
$
,
or
,
buttons to select the
EASY OPERATION option.
3 Press the OK button to select this option.
Result
: The EASY OPERATION menu is displayed.
4 Press the corresponding
$
or
buttons, until the
PDC/VPS DEFAULT option is selected.
5 Press
❿!
button to select ON in PDC/VPS DEFAULToption.
6 On completion, press MENU twice to exit the menu.
VPS/PDC Default
EASY OPERATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
$❷!!
➛❿!!
OK END:MENU
PDC/VPS DEFAULT :OFF
VIDEOPLUS EXTEND :OFF
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
$
END:MENU
BONUS
BONUS
PDC/VPS DEFAULT :OFF
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
$
END:MENU
BONUS
(SV-245B/SV-243B)
(SV-240B)
01316A SV-245B/XEU-GB4 7/27/02 5:28 PM Page 34
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SV-245B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SV-245B in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info