39045
14
Zoom out
Zoom in
Previous page
1/25
Next page
GB
25
Modifying VIDEOPLUS+ Programming
(SV-245B/SV-243B Only)
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press MENU a second time to confirm.
If you wish to... Then...
Select an input source other Press the
or
buttons, until the PR selection flashes.
than the tuner (AV1)
Press the INPUT button one or more times to change the
input source selection.
Result
: The programme number is replaced by:
The AV1 source using the INPUT button for a
satellite tuner or external video source
The input source must be selected before changing any
other value.
Record a programme every day Press the
or
buttons, until the DAY selection flashes.
(Monday to Sunday) at the same time
Press the
$
or
buttons, until the DLY (Daily) value is
displayed.
Record a programme every week Press the
or
buttons, until the DAY selection flashes.
on the same day and at the same time
Press the
$
or
buttons, until the W- (Week) value is
displayed, followed by the required day.
Example
: W-SA(Weekly Saturday)
Extend the recording time Press the
or
buttons, until the STOP selection flashes.
Press the
$
or
buttons to increase or decrease the stop
time.
Select the recording speed Press the
or
buttons, until the recording speed selection
flashes.
Press the
$
or
buttons until the correct indication is
displayed:
AUTO (Auto Tape Speed Select) : see page 26
SP(Standard Play)
LP(Long Play)
Select the PDC recording Press the
or
buttons, until the V/P selection flashes.
Press the
$
or
buttons until the “ON” indication is displayed.
Do not select PDC unless you are sure the programme you
wish to record is broadcast with PDC. If you do set PDC ON
(by selecting “ON” in the right - hand column on the screen),
then you must set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer recording
won’t take place.
GB
24
Using the VIDEOPLUS+ Feature
(SV-245B/SV-243B Only)
Before presetting your VCR:
Switch on both the television and your VCR
Check that the date and time are correct
Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
1 Press the TIMER button.
Result
: The TIMER METHOD is displayed.
2 Press the corresponding
$
or
buttons, until the VIDEOPLUS
option is selected.
3 Press the
❿!
button to select VIDEOPLUS.
Result
: A message is displayed to allow you to enter the
VIDEOPLUS+ code.
If all six programmes have been set, the message TIMER
IS FULL is displayed. Refer to page 27 if you wish to
cancel a preset recording.
4 Press the numeric buttons to enter the code opposite the
programme that you wish to record in your television magazine.
If you wish to correct the VIDEOPLUS+ code that you are
entering:
Press the
button until the digit to be corrected is
cleared
Enter the correct digit
5 Press the MENU button.
Result
:
The information concerning the programme is displayed.
When using the VIDEOPLUS+ function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the
$
or
buttons. Refer to the following page if:
The programme number or times flash
You wish to modify the programme
6
If the programme and times are correct, press the MENU button.
7 Press the VCR STANDBY/ON (STANDBY/ON) button to activate
the timer.
8 Refer to page 27 if you wish to:
Check that your VCR has been programmed correctly
Cancel a preset recording
The numbers next to each TV programme listing are
VIDEOPLUS+ code numbers, which allow you to
programme your videorecorder instantly with the remote
control. Tap in the VIDEOPLUS+ code for the programme
you wish to record.
VIDEOPLUS+ is a trademark of Gemstar Development Corporation. The VIDEOPLUS+
system is manufactured under licence from Gemstar Development Corporation.
(SV-245B)
(SV-243B)
SPEED DUB TV/VCR TIMER
1
VIDEOPLUS
CODE ---------
CODE:0-9 CORRECT:
END:MENU
**
TIMER METHOD
**
STANDARD
VIDEOPLUS
$
END:MENU
STANDBY/ON
S
H
PROG
1/JAN MON 21:28
PR DAY START
STOP V/P
1 MO 1 12:00
12:50SP ON
-- ---- --:--
--:---- -
-- ---- --:--
--:---- -
-- ---- --:--
--:---- -
-- ---- --:--
--:---- -
-- ---- --:--
--:---- -
$
➛❿
DELETE:CLR/RST MENU
7
VCR STANDBY/ON
SH
7
01316A SV-245B/XEU-GB3 7/27/02 5:26 PM Page 24
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SV-245B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SV-245B in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info