450072
54
Zoom out
Zoom in
Previous page
1/66
Next page
5-2 More Information
5-2 RS232C Command Table
Communication Format (Complies with the RS232C Standard)
Baud rate : 9,600 bps
parity : None
Data bits : 8, stop bit : 1
Flow Control : None
Serial Communication Protocol
1. Command Packet Structure [7bytes]
A command packet consists of 7 bytes in total.
The two bytes 0x08 and 0x22 signify that the packet is for serial communication.
The following 4 bytes represent a pre-defined command that can be defined by the user.
The last byte is the checksum which checks the validity of the current packet.
Header [2 Byte]: Pre-defined values fixed to 0x08 and 0x22.
Cmd1 [1 Byte]: The first value of the code defined in the command list (Hexadecimal)
Cmd2 [1 Byte]: The second value of the code defined in the command list (Hexadecimal)
Cmd3 [1 Byte]: The third value of the code defined in the command list (Hexadecimal)
Value [1 Byte]: Input parameter for the command (Default: 0) (Hexadecimal)
CS [1 Byte]: Checksum (the 2’s complement of the sum of all the values except for the CS value.)
2. Response Packet Structure [3 Bytes]
1. Success
2. Fail
When the received packet from an external device has a valid value, a Success packet is sent. Otherwise, a Fail
packet is sent.
A Fail packet is sent if:
The received packet length is not equal to 7 bytes.
The 2 byte packet header value is not equal to 0x08, 0x22.
The check sum is incorrect.
Failure detection by an external device
An external device classifies the packet as Fail if it does not receive a Success packet within 100ms.
0x08 0x22 cmd1 cmd2 cmd3 value CS
0x03 0x0C 0xF1
0x03 0x0C 0xFF
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SP-M270 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SP-M270 in the language / languages: English as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung SP-M270

Samsung SP-M270 User Manual - German - 66 pages

Samsung SP-M270 User Manual - Dutch - 67 pages

Samsung SP-M270 User Manual - French - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info