476957
49
Zoom out
Zoom in
Previous page
1/78
Next page
Using 3-5
3-5-3. Setup
MENU DESCRIPTION
Install To tailor the picture to the installation location, you can invert the projected images vertically / hori-
zontally.
<Front-Floor> : Normal Image
<Front-Ceiling> : Horizontal/Vertical Reversed Image
<Rear-Floor> : Horizontally Reversed Image
<Rear-Ceiling> : Vertically Reversed Image
Lamp Mode Used to set the image brightness by adjusting the amount of light generated by the lamp.
<Eco> : This mode is optimized for screens smaller than 100 inches.
This mode decreases the lamp brightness and power consumption in order to extend the lamp
lifetime and reduce noise and power consumption.
<Normal> :This mode is te most general mode and works well in most situations.
<Bright> : This mode maximizes the lamp brightness when the ambient illumination is bright. As
the brightness of the lamp increases, the lamp lifetime can be reduced and noise and power
consumption may increase.
Auto Keystone If video scenes are distorted or tilted, you can compensate for this by setting the <Auto Keystone>
function to <On> so that the <V-Keystone> function automatically starts.
<Off>-<On>
Keystone If video scenes are distorted or tilted, you can compensate for this using the vertical/horizontal Key-
stone function.
<V-Keystone > : When the projector image is not displayed vertically on the screen, the image
can be calibrated using the <V-Keystone> function.
<H-Keystone> :When the projector image is not displayed horizontally on the screen, the image
can be calibrated using the <H-Keystone> function.
The <Keystone>, which is a function for calibrating a skewed image, may degrade image
quality when it is activated.
The sound output of your projector is temporarily stopped while the keystone is being changed.
The <Keystone> function does not adjust the appearance of the On Screen Display (OSD).
Background You can set the <Background> the projector displays when there is no signal from the external device
connected to the projector.When the projector receives a signal, the <Background> you set disap-
pears and the projector displays a normal screen.
<Logo>-<Blue>-<Black>
Test Pattern Generated by the projector itself. Use to optimize the installation of the projector.
<Crosshatch> : You can check whether the picture is distorted or not.
<Screen Size> : You can refer to picture format sizes such as 1.33 : 1 or 1.78 : 1.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SP-L301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SP-L301 in the language / languages: English as an attachment in your email.

The manual is 4,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung SP-L301

Samsung SP-L301 User Manual - German - 80 pages

Samsung SP-L301 User Manual - Dutch - 80 pages

Samsung SP-L301 User Manual - French - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info