621307
44
Zoom out
Zoom in
Previous page
1/70
Next page
setup screen
44_ setup screen
Storage
You can activate recording on your device, set the recording conditions, check the saved data capacity and
format the device itself.
1. From the Setup menu, select the <Event (
)> tab.
2. Click <Storage>.
3. Select a device to save data in.
M
`
If your device is properly recording data, it will display Recording”.
`
If you see an “Error” message, check the following:
-
Check the storage to see if it is connected to the device.
-
Check the files in the storage to see if they are damaged.
-
Check the storage to see if they are physically damaged.
`
If the “Error” message does not disappear after following the
instructions, format the Micro SD card.
After formatting, if the error message still remains, replace the Micro
SD card.
`
If you remove the Micro SD card without changing a button to ‘off’ position in settings or if you connect a camera to an
unstable power source, the Micro SD card may be damaged.
J
`
After operation in record mode, you are limited to 2 simultaneously accessible profiles, and to 3 connected users. However,
existing users will be sustained.
To make recording on the Micro SD memory
1. Set the SD card unit to <On>.
2. Click the [Apply (
)] button.
3. Check the memory card’s <Free size> and <Total size>.
You can format the Micro SD card by clicking the <Format> button.
`
Some frames may be skipped if the Micro SD memory card operates at the lower speed than recommended.
For more details, refer to “Recommended Micro SD/SDHC/SDXC Memory Card Specifications. (Page 7)
`
For a Micro SD memory card with a large capacity, the formatting will be slowed down accordingly.
`
The data traffic will increase when the camera is set to higher resolution, higher bit rate, and/or higher framerate.
If there is too much data traffic, some frame may be skipped although it is stored in a full frame.
`
When a frame skip occurs, images are saved at the rate of min. one image per sec.
4. Specify the storage action.
Record profile : Shows recording profile’s codec type.
Normal : Make recording at a certain frame rate.
Event : Set the recording type for a certain event that occurs.
Pre event duration : Specify the time point before the occurrence of the alarm; starting from the time
point, the images will be transferred. You can specify up to 5 seconds before the occurrence of the
alarm.
Post event duration : Specify the time point after the occurrence of the alarm; to the specified time
point, the images will be transferred. You can specify up to 120 seconds after the occurrence of the
alarm.
Record file type : It specifies the file format of the recorded images.
- STW : It is Samsung’s unique file format.
- AVI : It is the conventional avi format.
J
`
If the Record file type is changed, the existing data is formatted.
Overwrite : If the Micro SD memory is full, this will delete old data and store new data in replacement.
Auto delete : Data for a certain period is deleted, while other data is not deleted.
This can be set within the range of one day to 180 days.
J
`
If the storage period is expired, data is automatically deleted and new data will be recorded. Once deleted, it cannot be
recovered.
5. Specify the <Normal record setup>.
Always : Always save recorded video in the Micro SD memory card.
`
If set to Always, the activation time cannot be changed.
Only scheduled time :
Records only on the specified time of the specified day of week.
[Clear ( )] : Reset all settings.
6. When done, click [Apply (
)].
If you want to record in your NAS
1. Set the saving operation and basic recording.
J
`
Auto deletion is supported only if your NAS meets the recommended
specifications.
2. Enter the information registered in your NAS.
IP address : Unique IP address assigned to the NAS.
ID : An ID registered in the NAS.
Password : Password registered in the NAS.
Default folder : Designate the NAS user folder to save data
in.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SNV-6085R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SNV-6085R in the language / languages: English as an attachment in your email.

The manual is 21,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info