621307
39
Zoom out
Zoom in
Previous page
1/70
Next page
English _39
SETUP SCREEN
To Set IR
1. Select <IR>.
2. Select each item and set it properly.
Mode : When the IR indicator turns on in B/W mode, the
screen will be protected from saturation on the center area so that you can identify a short-distant
object.
- Off : IR mode will be disabled.
- Auto : Adjust the IR brightness according to the brightness of the object on the center screen.
- Manual : Adjust the IR brightness manually.
Level : If you set IR mode to Manual, you can adjust the brightness level of the IR indicator to between
1 and 99.
Smart codec
Set a desired area of the video incoming from the camera as ROI area and specify the detection sensitivity for
the area.
1. From the Setup menu, select the <Video & Audio (
)>
tab.
2. Click <Smart codec>.
3. Select ROI Area.
Face detection : Active if a face is recognized on the
monitoring screen.
J
`
You can detect max 35 faces on the screen at the same time.
`
The minimum size of detectable face is 45x45 (horizontal x vertical)
pixels for the given max resolution. But there may be some errors
depending on the characteristics of your face or lighting.
Manual : Specify the ROI area to monitor manually.
4. Set the image quality.
The ROI area will be displayed in the specified quality.
5. If manually specifying the ROI area, select a desired area with the mouse pointer and drag it as much as
you want.
`
You can specify up to 5 distinct areas.
6. To cancel all the settings for the area, click the [Clear (
)] button.
7. When done, click [Apply (
)].
J
`
The Smart codec will not be active if it is set to <Off> in <Video profile>. (page 30)
`
Go to <Event>
<Face detection> and change it to <Enable> to set the desired area for facial detection.
Focus setup
You can adjust the focus and zoom ratio of video image.
1. From the Setup menu, select the <Video & Audio (
)>
tab.
2. Click <Focus setup>.
3. Set the focus and zoom.
Focus : Manually adjusts the lens focus (Far
Near).
Zoom : Manually adjusts the zooming (Wide
Tele).
Simple focus : Drag your mouse on the video to set the
location for auto focus. Click [
] button to fit the focus
automatically.
J
`
The Simple focus mode may not fit correctly in the following cases:
-
Sudden change to the object in Simple focus mode (sudden movement, appearance or disappearance)
-
Radical change to the brightness in Simple focus mode
-
Image of a low contrast
-
If the camera is exposed to a strong light source in the front or surroundings
`
In case the focus is inappropriate apart from mentioned above, use [ , , , , , ] button to
manually adjust the focus.
`
In a situation where Simple focus is hardly applied, try to use the manual focus mode.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SNV-6085R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SNV-6085R in the language / languages: English as an attachment in your email.

The manual is 21,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info