621295
79
Zoom out
Zoom in
Previous page
1/116
Next page
English _79
SETUP SCREEN
To make recording on the SD memory
Check the <Total Size> and the <Free Size>.
If the SD memory has a sufficient free space, set <Record> to On.
Otherwise, check the stored data and if you find them not important, then click
<Format> to format the SD memory.
If your SD memory card writes slowly, only one frame per second will be stored.
For a SD memory card with a large capacity, the formatting will be slowed down accordingly.
Note that only one frame per second (1 fps) will be stored for the following resolutions : 1280x1024,
1280x720, 800x600.
If the size of data grows with time, only 1 fps can be stored even if you set the record quality to Full
Frame.
Specify the record conditions.
Record 1 fps forcibly : Only one frame per second will be recorded regardless of
the existing record profile.
Overwrite : If the SD memory is full, this will delete old data and store new data in
replacement.
Pre-alarm duration : Specify the time point before the occurrence of the alarm;
starting from the time point, the images will be transferred. You can specify up to
5 seconds before the occurrence of the alarm.
Post-alarm duration : Specify the time point after the occurrence of the alarm; to
the specified time point, the images will be transferred. You can specify up to 120
seconds after the occurrence of the alarm.
When done, click [Apply].
Alarm Input
You can set the alarm input type, activation time, and operation mode.
From the Setup menu, select the
<Event (
)> tab.
Click <Alarm input>.
Specify an input device.
Normal Open : It is normally open,
but if it is closed, an alarm will be
triggered.
Normal Close : It is normally closed,
but if it is open, an alarm will be
triggered.
Specify the <Activation time>.
Always : Always activates when an alarm occurs.
Only scheduled time : Activates at a specified day of the week for a specified time
period. The start time should be earlier than the end time, both of which are
different with each other.
1.
2.
3.
y
y
y
y
4.
1.
2.
3.
y
y
4.
y
y
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SNV-5080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SNV-5080 in the language / languages: English as an attachment in your email.

The manual is 4,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info