621303
86
Zoom out
Zoom in
Previous page
1/116
Next page
NETWORK PTZ CAMERA User Guide
86
Chapter 5. Troubleshooting
If you are having problems with the product, please consult the following information
first. If the problem persists, contact your vendor.
Problem Cause and Solution
The controller does not
control the camera.
Make sure the camera is connected to a network.
Verify the settings for ID, protocol, and baud rates.
(Refer to Chapter 3. Installing Camera & Network Setup)
No video is displayed on the
monitor.
Check if the power cable is securely connected to the camera
and the monitor.
Check if the video cable is properly connected. Consult the
operation manual for the system controller connected to the
camera.
Check the camera's fixed shutter speed. Adjust the camera's
shutter menu.
The picture is too dark/
bright.
Check the camera's Brightness menu. Adjust the camera's
Brightness menu.
The monitor displays
nothing but a white image.
Check the WDR settings.
The monitoring screen is
out of focus.
Check if the dome cover or the camera lens is dirty or
smudged.
If it is, clean the dirt off.
Verify the distance between the camera and the subject, as
well as the subject's surroundings. The camera may have
difficulty focusing on a subject against a white background.
If the camera is having difficulty auto-focusing on a particular
subject, set the Focus mode to Manual and adjust the focus
manually.
Use the camera reset menu to restore the camera settings to
default.
The monitoring screen is
out of focus.
Adjust the Sharpness level.
Digital noise appears on the
screen.
Check if the video cable is properly connected.
Make sure that the power cable and video cable do not
exceed the recommended maximum lengths.
Adjust the Sharpness level.
The monitoring screen is
flickering.
Check if the camera is pointing directly at a fluorescent light
or sunlight. If so, change the camera's direction to remove the
flickering.
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SNP-3370 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SNP-3370 in the language / languages: English as an attachment in your email.

The manual is 9,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info