681530

Samsung SL-C4060 Manual

275
Zoom out
Zoom in
Previous page
1/316
Next page
Scanning problems | 275
Scanning problems
Condition Suggested solutions
The scanner does not
work.
• Make sure that you place the original to be scanned face down
on the scanner glass, or face up in the document feeder (see
"Loading originals" on page 40).
• There may not be enough available memory to hold the
document you want to scan. Try the Prescan function to see if
that works. Try lowering the scan resolution rate.
• Check that the machine printer cable is connected properly.
• Make sure that the machine printer cable is not defective.
Switch the printer cable with a known good cable. If necessary,
replace the printer cable.
• Check that the scanner is configured correctly. Check scan
setting in the application you want to use to make certain that
the scanner job is being sent to the correct port (for example,
USB001).
The unit scans very
slowly.
• Check if the machine is printing received data. If so, scan the
document after the received data has been printed.
• Graphics are scanned more slowly than text.
• Communication speed slows in scan mode because of the large
amount of memory required to analyze and reproduce the
scanned image. Set your computer to the ECP printer mode
through BIOS setting. It will help to increase the speed. For
details about how to set BIOS, refer to your computer user
guide.
Message appears on your
computer screen:
• Device can’t be set to
the H/W mode you
want.
• Port is being used by
another program.
• Port is disabled.
• Scanner is busy
receiving or printing
data. When the current
job is completed, try
again.
• Invalid handle.
• Scanning has failed.
• There may be a copying or printing job in progress. Try your job
again when that job is finished.
• The selected port is currently being used. Restart your
computer and try again.
• The machine printer cable may be improperly connected or the
power may be off.
• The scanner driver is not installed or the operating
environment is not set up properly.
• Ensure that the machine is properly connected and the power
is on, then restart your computer.
• The USB cable may be improperly connected or the power may
be off.
… 275 …


Need help? Post your question in this forum.

Forumrules
1

Forum

samsung-sl-c4060

Reset search

  • How can we make Samsung sl-c4060 printer default black and white from the printer ?
    If we print color from the printer also it should be printed in black and white. Submitted on 20-4-2022 at 09:34

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SL-C4060 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SL-C4060 in the language / languages: English as an attachment in your email.

The manual is 27,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung SL-C4060

Samsung SL-C4060 User Manual - German - 343 pages

Samsung SL-C4060 User Manual - Dutch - 335 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info