Wireless network setup (Optional) | 151
IP setting using SetIP Program (Windows)
This program is used to manually set the network IP address of your machine using its MAC
address to communicate with the machine. The MAC address is the hardware serial number of
the network interface and can be found in the Network Configuration Report (see "Printing a
network configuration report" on page 142).
Configuring the machine’s wireless network
Before starting, you will need to know the network name (SSID) of your wireless network and the
network key if it is encrypted. This information was set when the access point (or wireless router)
was installed. If you do not know about your wireless environment, please ask the person who set
up your network.
To configure wireless parameters, you can use SyncThru™ Web Service.
Using SyncThru™ Web Service
Before starting wireless parameter configuration, check the cable connection status.
1 Access the SyncThru™ Web Service (see "Logging into SyncThru™ Web Service" on page
199).
2 Select Network Settings tab.
3 Select Wi-Fi > Wizard.
4 Select the one Network Name(SSID) in the list.
5 Select Next.
If the wireless security setting window appears, enter the registered password (network
password) and select Next.
6 The confirmation window appears, please check your wireless setup. If the setup is right,
click Apply.
Turning the Wi-Fi network on/off
1 Access the SyncThru™ Web Service (see "Logging into SyncThru™ Web Service" on page
199).
2 Select Network Settings tab > Wi-Fi.
3 You can turn the Wi-Fi network on/off.
