Getting to know your Monitoring system
Wireless Receiver
After opening the box, fully charge the monitor before use. After initial charge, recharge as needed.
Front Controls
Navigation Controls / Button
Viewing Mode: The following controls are used while watching live video from the camera:
Press the [+] or [–] keys to increase or decrease the volume.
Press the [A] key to view cameras in automatic switching mode.
Press the [M] key to manually switch between cameras.
Menu Mode: Use the [
+/–/A/M] key arrows to navigate in Menu Mode.
Press the [
] button to confirm the menu selection.
•
•
•
Receiver Antenna
Receives and sends signals from or to the camera.
3.5” LCD Screen
Displays video from the camera.
Microphone
Transmits audio to the camera when Talk Button is
pressed down and held like a walkie talkie.
MENU Button
Press to access the receiver menu.
Press the button again to exit.
Navigation Controls/
Button
Use the controls to move and select while in Viewing
Mode and Menu Mode.
Play
Press to go to "File List" if Micro SD card is inserted.
SLEEP /
Button
Used to activate the screen saver mode.
Press the [A/M] or [SLEEP] button again to exit the
screen saver mode.
If Power Saving mode is deactivated by a sound trigger,
the device will go back to black screen approximately
8 seconds after the last trigger.
This button is also used to delete the selected data on
the Micro SD card while the monitor is in search mode.
