536757

Samsung SCX-4623F Manual

85
Zoom out
Zoom in
Previous page
1/121
Next page
Management tools_ 85
3. Click to open the TCP/IP configuration window.
4. Enter the network card’s MAC address, IP address, subnet mask,
default gateway, and then click Apply.
When you enter the MAC address, enter it without a colon(:).
5. The
machine prints the network information. Confirm all the settings
are correct.
6. Close the SetIP program.
Macintosh
SetIP program should be automatically installed during the printer driver
installation.
Printing out the machine’s MAC address
1. Press Menu on the control panel.
2. Pres
s the left/right arrow until Network appears and press OK.
3. Press the left/right arrow until Network Info. appears and press OK.
You can find your machine’s MAC address and IP address.
Setting network values
If you want to change your network printer IP setting, follow the below
instruction.
If you select Typical installation for a network printer during the
printer driver installation, the SetIP program automatically runs
after the installation. Go to step 4.
1. Prin
t the machine’s network configuration report to find your
machine’s MAC address.
2. Open the Library folder > Printers > Samsung > your printer
model name > SetIP.
3. Double click the SetIPApplet.html file.
4. The certificate window appears, click Trust.
5. Click to open the TCP/IP configuration window.
6. Enter the network card’s MAC address, IP address, subnet mask,
default gateway, and then click Apply.
When you enter the MAC address, enter it without a colon(:).
7. The
machine prints the network information. Confirm all the settings
are correct.
8. Close the SetIP program.
Linux
SetIP program should be automatically installed during the printer driver
installation.
Printing out the machine’s MAC address
1. Press Menu on the control panel.
2. Pres
s the left/right arrow until Network appears and press OK.
3. Press the left/right arrow until Network Info. appears and press OK.
You can find your machine’s MAC address and IP address.
Setting network values
1. Print the machine’s network configuration report to find your
machine’s MAC address.
2. Open the /opt/Samsung/mfp/share/utils/.
3. Double click the SetIPApplet.html file.
4. Click to open the TCP/IP configuration window.
5. Enter the network card’s MAC address, IP address, subnet mask,
default gateway, and then click Apply.
When you enter the MAC address, enter it without a colon(:).
6. The machine prints the network information. Confirm all the settings
are correct.
7. Close the SetIP program.
USING THE LINUX UNIFIED DRIVER
CONFIGURATOR
Unified Driver Configurator is a tool primarily intended for configuring
machine devices. You need to install Unified Linux Driver to use Unified
Driver Configurator (See "Installing the Unified Linux Driver" on page 32).
After the driver is installed on your Linux system, the Unified Driver
Configurator icon will automatically be created on your desktop.
Opening the Unified Driver Configurator
1. Double-click the Unified Driver Configurator on the desktop.
You can also click the Startup
Menu icon and select Samsung Unified
Driver > Unified Driver Configurator.
2. Click each button on the left to switch to the corresponding configuration
window.
To use the on screen help, click Help.
3. Af
ter changing the configurations, click Exit to close the Unified Driver
Configurator.
Printers configuration
Printers configuration has the two tabs: Printers and Classes.
1 Printers
Configuration
2 Scanners
Configuration
3 Ports
Configuration
… 85 …


Need help? Post your question in this forum.

Forumrules
1

Forum

samsung-scx-4623f

Reset search

  • Hello! I have a problem with my Samsung 4623F printer.I receive the error message "01-00-2007 [DMY]" on the display.Thank you!
    Submitted on 10-7-2022 at 09:25

    Reply Report abuse

    • I have the same problem. I suspect it is the battery, but I haven't been able to find out where the battery is in to printer. I believe it is a cr-2032 battery, but the location is a mystery.
      Answered on 3-5-2023 at 21:02

      Vote up (3) Report abuse

  • Trying to scan to PC. Goes as far as "connecting and then says not available. It is plugged into computer.
    I have turned of and on again - same result. What do I do? Submitted on 13-8-2020 at 13:00

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SCX-4623F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SCX-4623F in the language / languages: English as an attachment in your email.

The manual is 11,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung SCX-4623F

Samsung SCX-4623F User Manual - French - 135 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info