621379
17
Zoom out
Zoom in
Previous page
1/25
Next page
COLOR CCD CAMERA User Guide
32
COLOR CCD CAMERA User Guide
33
SPECIAL SETUP
PRIVACY ON
DAY/NIGHT AUTO
1. Press the Function Setup Switch to access the main setup menu and then position the
indicator over 'SPECIAL' by moving the up or down direction of the Function Setup Switch.
2. Press the Function Setup Switch to confirm.
PRIVACY : Hide an area you want to hide on the screen.
When the SPECIAL menu screen is displayed, by
moving the up or down direction of the Function Setup
Switch so that the arrow indicates ‘PRIVACY’.
Set up the mode using the 4 direction buttons.
- AREA SEL : You can select up to 12 MD areas.
- AREA MODE : Determines whether to use the area selected in the AREA SEL.
- MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White,
Gray.
PRIVACY SETUP
▶AREA SEL AREA1
AREA MODE ON
MASK COLOR GRAY
TOP 39
BOTTOM 79
LEFT 14
RIGHT 53
RETURN
|||||
|
|||||||||||||||||||
|||||||
|
|||||||||||||||||
|
|||||||||||||||||||||||||
|||||
|
|||||||||||||||||||
Operating Your Camera
SPECIAL SETUP
PRIVACY OFF
DAY/NIGHT AUTO
DIS OFF
DAY/NIGHT : You can display pictures in color or black and white.
When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by moving the up or
down direction of the Function Setup Switch so that the arrow indicates 'DAY/NIGHT'.
Select a desired mode by moving the left or right direction of the Function Setup
Switch according to the picture display you want.
• DWELL TIME : You can select tday/night switching delay time from.
5,7,10,15,20,30,40, 60(sec)
• DURATION : You can select the day/night switching point(lux).
AUTO SETUP
IR MODE MANUAL
COLORB/W -
DWELL TIME 5 SEC
DURATION SLOW
B/WCOLOR -
DWELL TIME 5 SEC
DURATION SLOW
RETURN
BURST MODE SETUP
BURST MODE ON
IR MODE MANUAL
RETURN
When AGC is middle mode.
Color B/W B/W Color
Fast 0.7lux 5lux
Slow 1lux 3lux
BURST LEVEL SETUP
BURST LEVEL 50
RETURN
||||||||||||||||||||||
|
- AUTO : The mode is switched to 'Color' in a normal
environment, but switches to 'B/W' mode
when ambient illumination is low. To set up
the switching time or speed for AUTO mode,
press the Function Setup Switch.
· IR MODE AUTO :
The IR LED is controlled automatically
according to brightness of object
which is situated on screen center.
· MANUAL : You can control WIDE LED and NARROW
LED step from 0 to 32.
· OFF : Disabled.
*
LED ON : Only B/W mode.
IR LEVEL SETUP
WIDE 32
NARROW 32
RETURN
IR LEVEL SETUP
WIDE 32
NARROW 32
RETURN
- COLOR : The picture is always displayed in color.
- B/W : The picture is always displayed in black and
white.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SCO-2120R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SCO-2120R in the language / languages: English as an attachment in your email.

The manual is 9,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info