621340
9
Zoom out
Zoom in
Previous page
1/19
Next page
Thermal Night Vision Camera User Guide
16
Thermal Night Vision Camera User Guide
17
Function Explanation Notes
RS485 I/F
(R+/-, D-/+)
Operates the RS485 I/F.
Because full-duplex communication
is supported, this function is used
to update F/W.
Standard users should utilize the
same cables as those employed at
the time of shipment.
Shipment status : R+,D+ => TRX+
R-,D- => TRX-
Communication terminator
settings:
- Default value: ON
- If multiple cameras are installed :
Turn only the camera measuring
the furthest distance ON, and the
remaining cameras OFF.
Video output
(Video)
Acts as a composite video signal
output.
Switch between NTSC/PAL using
the menu.
Power supply
(POW+/-)
Provides power. AC 24 V, 50/60 Hz
KEY contact
output
Operates menu controls.
(Has the same connection as the
circuit board KEY.)
This output is provided for
adjustment purposes. For that
reason, please refrain from
extending the controls to several
meters or longer.
(For remote control operation, use
RS485 I/F.)
LED
Notifies users using the LED
display whether the power is ON/
OFF, and whether a device
abnormality or warning has
occurred.
Power ON : Lighting
Device Abnormality/Warning :
Flashing
KEY controls
Enables operation of the menu
controls.
Used to make adjustments.
Connector specifications and signals
<Function Chart>
POWER LED
•PowerON:Lit
•Abnormality/Warning:Flashing
Terminal Block A
RS485 Terminator SW
•TerminatorON:1-2
•TerminatorOFF:2-3
Multi Direction S/W : same connector as Terminal Block B
Terminal Block B
PIN Name Explanation
1 R+ RS485+ Communications Non-inverting input/output
2 R- RS485- Communications Inverting input/output
3 D- RS485- Communications Inverting input/output
4 D+ RS485+ Transmission Non-inverting input/output
5 G Ground
6 Video
Composite video signal
Impedance : 75 Ω
7 G Ground
8 POW+ Power input AC +24 V
9 POW- Power input DC AC -24 V
PIN Name Explanation
1 *UP KEY UP contact input (Active LOW)
2 *DOWN KEY DOWN contact input (Active LOW)
3 *LEFT KEY LEFT contact input (Active LOW)
4 *RIGHT KEY RIGHT contact input (Active LOW)
5 *SET KEY SET contact input (Active LOW)
6 GND GND
7 MD Terminal used when product is shipped from the factory.
Interface
Rear Terminal Placement
Before supplying a terminal block with power, verify that the wiring has been properly
connected.
Notes
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SCB-9050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SCB-9050 in the language / languages: English as an attachment in your email.

The manual is 6,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info