621337
18
Zoom out
Zoom in
Previous page
1/23
Next page
34High Resolution Compact ATM Camera
How to use OSD Menu
35
How to use OSD Menu
Use the

switch to select one from PRIVACY
1 through 12.
Select one from PRIVACY 1~12 and press the SETUP
switch to conrm your setting. You can specify a pixel
that moves as you change the PIXEL LEVEL to set
the position.
PRIVACY ZONE SET1
PIXEL LEVEL [4]
<POINT>
<POSITION>
- How to set the point
You can set each position of the 4 points.
If you press the SETUP switch in <POINT>,
you will see the points available in the PRIVACY
ZONE. Each time you press the SETUP switch,
the points available will move.
Use the

switch to set the position of
each point. Set each position of the four points
and press the SETUP switch to complete the
positioning.
- How to set the position
You can move the position of the overall area.
By pressing the SETUP switch in <POSITION>,
you can move the overall position of the privacy
zone.
Use the

switch to move the position
and press the SETUP switch to conrm it.
Note :
If more than one PRIVACY ZONE is specied and the PRIVACY
SET is set to ON, the PIP function will be deactivated.
If the 12th PRIVACY ZONE is specied, the LINE function of
FENCE will be deactivated.
OTHER SET
<SCB-3020>
OTHER SET
EXTERNAL TRG OFF
FACTORY DEFAULTS
OSD COLOR BW
<SCB-2020>
OTHER SET
FACTORY DEFAULTS
OSD COLOR BW
EXTERNAL TRG
Set the EXTERNAL TRG menu to ON and press the
SETUP switch to display the appropriate screen.
EXTERNAL TRG
STILL TIME OFF
DELAY TIME FIX
You can set the STILL TIME to 1~4 seconds.
If DELAY TIME is set to FIX, the DELAY TIME will be
set in sync with the STILL TIME if set to USER, the
DELAY TIME will be set to your setting.
Note :
If VPS is set to OFF, the EXTERNAL TRG menu will be
deactivated.
If the external signal is received when the lighting control is not
stable, this may cause an error.
SCB-2020, the VPS and WDR mode are not available.
FACTORY DEFAULTS
All the settings will be restored to the factory default.
OSD COLOR [BW, R/G/B]
You can set the OSD(On-screen Display) color to
COLOR or B/W.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SCB-3020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SCB-3020 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info