630506
30
Zoom out
Zoom in
Previous page
1/291
Next page
30 • Getting Started SAM4s SPS-300 Operator's & Programming Manual v1.4
Clearing Memory
Before you use your SPS-300 Series ECR for the first time, you must perform a memory all
clear to insure that all totals and counters are cleared and that the default program is installed.
CAUTION: The procedures described in this area are security sensitive. Clearing the
SPS-300 Series memory after the register is put into service will erase all programming
as well as totals and counters. Do not share this information with unauthorized users
and distribute the key marked “C” only to those you may want to perform these
functions.
SPS-320/SPS-340 Memory All Clear
1. Turn the power switch located on the right side of the register to the OFF position.
2. Turn the control lock to the S position.
3. Press and hold the key position where the CHECK key is located on the default
keyboard layout.
4. Continue to hold the appropriate key while turning the power switch to the ON
position. The message “RAM ALL CLEAR" displays.
5. Press the upper left key of the keyboard, then the lower left key, then the upper right
key, and finally press the lower right key.
1
3
2
4
6. The display reads: RAM (16M). After a short delay, the message: "OK” will display
if the RAM check is good. Memory is cleared, the default program is installed and
the RAM CLEAR receipt is printed. The display now reads:
2-STATION PRINTER : ‘CASH’ Key
1-STATION PRINTER : ‘CLEAR’ Key
7. If you have an ER-320 (one printer station), press CLEAR.
If you have an ER-340 (two printer stations), press CASH.
SPS-320
SPS-340
SPS-320 and SPS-340
Press and hold the
CHECK key position
during power-up in S
mode.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung Sam4S SPS-345 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung Sam4S SPS-345 in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung Sam4S SPS-345

Samsung Sam4S SPS-345 User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info