630505
276
Zoom out
Zoom in
Previous page
1/291
Next page
276 • IRC (Inter-Register Communications) Appendix SAM4s SPS-300 Operator's & Programming Manual v1.4
IRC Functions
Reports
Using IRC, you can generate consolidated X (read) or Z (reset) reports from any register in
the system. The report option screen allows you to select “All” or specify individual
register(s) for consolidation. See “X Reports” on page 94 or “Z Reports” on page 104 for
detailed report-taking instructions.
Busy Registers
Reports cannot be taken from registers that are busy (inside a transaction) or powered “OFF”.
The message “IRC NOT READY” will display if an attempt is made to communicate with a
register that is not available. The register number of the unavailable register will also display.
Best Practice: In IRC systems it is recommended to use only the key lock to turn the
register to “OFF”. You may wish to leave the power switch in the “ON” positon and use
the Power Switch cover (see page 13) to prevent the register from being turned off
inadvertently (and therefore not available for IRC functions.) With the power switch
“ON” you can turn the key to “OFF” so that reports and polling function will remain
available.
Device Sharing
Limited device sharing is available for remote printers and Datatran integrated payment
appliances and polling. Through IRC, traffic from satellite registers is sent to the Datatran or
printer that is attached to one of the registers in the network. In the case of polling, the PC
can access satellite registers through the connection to one of the registers.
Notes:
Caution: The register where the shared device is connected will be momentarily busy when
traffic from a satellite register is communicated. The message “WORKING” will display
momentarily on the register that is connected to the shared device until the communication is
complete.
Best Practice: In an IRC System where both a Datatran and remote printer are shared, it is
recommended that both devices be connected to the same register to reduce the amount of
cross-traffic between registers.
Feature Notes:
The Tracking File (Check File) cannot be shared through IRC. If check tracking is used, each
register will maintain its own file. Separate check files on individual registers can be polled
through IRC.
Other optional RS-232 devices, such as scales, scanners, pole displays, and coin dispensers
operate exclusively with the register to which they are connected, and cannot be shared.
276


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung Sam4S SPS-325 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung Sam4S SPS-325 in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung Sam4S SPS-325

Samsung Sam4S SPS-325 User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info