630505
271
Zoom out
Zoom in
Previous page
1/291
Next page
SAM4s SPS-300 Operator's & Programming Manual v1.4 Integrated Payment Appendix • 271
Local Batch Status Explanations:
(From Left to Right)
o Batch Status C=Closed/O=Open/X=Incomplete
4 Batch Number
3 Batch Transaction Count
3 Batch Item Count
2.00 Batch Balance
0 Batch Forwarded Transaction Count
.00 Batch Forwarded Balance
Dial In Load/Dial Out Load
For Legacy DataTran equipment:
If instructed by Datacap support, you can use these options to update DataTran software.
Choose Enable Dial In Load to allow Datacap to call the DataTran and send updates. Choose
Enable Dial Out Load to call Datacap to connect. You will be required to enter the phone
number and terminal I.D. (password) which will be given to you by Datacap.
For TwinTran:
When a TwinTran is first installed, the dealer must do a Dial Out Load through the IP
connection. If, for any reason, the internet is not available, the device cannot be loaded. If it
is being installed at a location where the Internet is not currently operational and the customer
wants to use the dial out method for approvals, the procedure below must be done at a
location where the internet is working.
To load a TwinTran using a Sam4s register;
With the TwinTran connected to the register and an active Ethernet line, enter into the Dial
Out mode. At the Phone number field enter the number “1”. If the register uses the code
entry method for alpha characters enter the 3 digit code (049). At the Enter ID prompt, enter
the serial number of the TwinTran. Select Tone phone connection. The TwinTran will call
Datacap’s host PC and load itself. This takes approximately 20 seconds. After the TwinTran is
loaded, one successful credit transaction must be done. After that the unit can be connected as
the customer wishes.
Tip Operation
Follow the prompts to enter the record number, original transaction amount and tip amount.
If the record number and transaction number are valid, the tip amount is entered in the batch
and a tip entry chit prints.
271


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung Sam4S SPS-325 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung Sam4S SPS-325 in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung Sam4S SPS-325

Samsung Sam4S SPS-325 User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info