SAM4S NR-500 Series Manual Service Mode Programming • 95
Memory Allocation
Note: You must step through every memory allocation field to implement new
memory allocation. If you press CLEAR, at any field you will abort memory
allocation processes without making changes. Changes to Memory Allocation will
clear all program data.
1. From SERVICE MODE menu press 3 and CASH to display the MEMORY
CLEAR screen:
Press the ↑ key and the↓ key to select menu and press the CASH key to
confirm. You can also select menu by page↑ key and page↓ key.
ALLOCATION
PLU
(60-8000) 1000
2. Starting at the PLUs field, enter the quantity of each memory field. Press the
CASH key after each entry, and the screen will move to the next field.
ALLOCATION
ARE YOU SURE?
Y=CASH N=CLEAR
3. Continue filling each field until completion. Press CASH after setting the
last field, "CHECK TYPE". The screen will display "ARE YOU SURE ?".
Press the CASH for YES or the CLEAR for No.
4. The message will print either: "MEMORY ALLOCATION OK" or
"MEMORY ALLOCATION SIZE OVER" if you attempt to allocate features
requiring more memory than is available.
DEFAULT Memory allocation Specifications
ALLOCATION ITEM DEFAULT MAX
PLU 1000
8000
CLERK 10
99
GROUP 10
99
PRICE LEVEL 1 2
MIX AND MATCH 20 100
EJ LINE 1000 15000
CHECK# 10
500
SOFT CHECK LINES 50 100
CHECK TYPE 0 SOFT(0) / HARD(1)