15
REVERSING THE DOOR SWING
• Before reversing the door, ensure first that the refrigerator is disconnect by the plug
from the mains. You should take out contents and accessories like door guard from
the doors. Be careful not to drop the doors during dissembling or assembling.
Warning
‑ Read these instructions completely and carefully
1. Handle parts carefully to avoid scratching the paint.
2. Lay out all the screws by their related parts to avoid using them in the wrong places.
3. Provide a non-scratching work surface for the doors. (ex:blanket)
4. During door reversing, refrigerator should not be stained with oil.
screwdriver 7/16" inch wrench
‑ TOOLS YOU WILL NEED ‑ ADDITIONAL PARTS (IN TOP COVER)
Cover Wire Hinge, L
1.
After removing screws,
disassemble the CAP CABI.
‑
DISASSEMBLY OF THE FRIDGE DOOR
CAP CABI
2. Disconnect electric wires
inside of the CAP CABI.
3. With a 7/16 inch wrench,
remove bolts on the top of the
refrigerator.
4. Disassemble the Fridge
door by lifting it upward.
Be careful not to drop and
scratch the face of the
Fridge door.
5.
Disassemble the COVER WIRE
DOOR on the top of the fridge
door with a flat-head screw
driver by putting it into the
indicated position(∆).
6.
Disjoin the COVER WIRE
HINGE, R from the ASSY HINGE
UPP as shown. Take out the
electric wire from the COVER
WIRE HINGE, L.
COVER WIRE DOOR
ASSY HINGE UPP
COVER WIRE HINGE, L
