63816
45
Zoom out
Zoom in
Previous page
1/113
Next page
English - 45
Setting Up Anynet+
The following settings are to use Anynet+ functions.
Using the Anynet+ Function
1 Press the MENU button. Press the ▲ or ▼ button to select
Application, then press the ENTER button.
2 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC),
then press the ENTER button.
3 Press the ▲ or ▼ button to select On, then press the
ENTER button.
®
The Anynet+ (HDMI-CEC) function is enabled.
®
If you select Off, Anynet+ (HDMI-CEC) is disabled.
®
When the Anynet+ (HDMI-CEC) function is disabled, all
the Anynet+ related operations are deactivated.
Turning an Anynet+ Device Off Automatically when the TV
is Turned Off
2 Press the ▲ or ▼ button to select Auto Turn Off, then
press the ENTER button.
3 Press the ▲ or ▼ button to select Yes, then press the
ENTER button.
®
The Auto Turn Off function is enabled.
®
If you select No, the Auto Turn Off function is
canceled. Press the EXIT button to exit.
®
The active source on the TV remote must be set to TV to
use the Anynet+ function.
®
If you set Auto Turn Off to Yes, connected external
devices are also turned off when the TV is turned off.
If an external device is still recording, it may or may not
turn off.
Scanning and Switching between Anynet
+
Devices
1 Press the TOOLS button.
®
Anynet+ devices connected to the TV are listed.
®
If you cannot find a device you want, press the red
button to scan for devices.
2 Press the ▲ or ▼ button to select a particular device and
press the ENTER button. It is switched to the selected
device.
®
Only when you set Anynet+ (HDMI-CEC) to On in the
Application menu, the Device List menu appears.
3 If you cannot find a device you want, press the ▲ or ▼
button to select Searching Connections, then press the
ENTER button.
The meassage Configuring Anynet
+
connection... is displayed. When searching devices
completes, the connected devices are listed in the Anynet
+
menu.
®
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during
the switching operation.
®
The time required to scan for devices is determined by the number of connected devices.
®
When the device scan is complete, the number of found devices is not displayed.
®
Although the TV automatically scans devices when it is turned on using the POWER button, devices
connected when the TV is on or under a specific circumstance are not displayed in the device list.
Therefore select Searching Connections menu to search devices.
®
If you have selected external input mode by pressing the SOURCE button, you cannot use the
Anynet
+
function. Make sure to switch to an Anynet
+
device by using the TOOLS button.
Continued...
Anynet+ (HDMI-CEC)
Application
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC) :
Auto Turn Off :
ReturnEnter
Move
Off
On
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC) :
Auto Turn Off :
ReturnEnter
Move
No
Yes
Tools
Move Enter
View TV
Device List
Recording : DVD
DVD Menu
DVD Menu
Picture Mode : Standard
Sound Mode : Standard
Sleep Timer : Off
Exit
wOw[\WPiu]_TWX\[^hUGGG[\ YWW_TW\TX\GGG㝘䟸GZaYWa\_
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung PS42A466 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung PS42A466 in the language / languages: English as an attachment in your email.

The manual is 3,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info