If you do not want to store the radio station found, revert to Step 4 and
search for another station.
Otherwise:
a Press PROGRAM/SET
Result
: The program number is displayed for a few seconds.
b Press TUNING and to assign a program number between 1
and 15.
c Press PROGRAM/SET to store the radio station.
Result:
The program number is no longer displayed and the station is
stored.
To store any other radio frequencies required, repeat Steps 3 to 6.
The PROGRAM function can be used to assign a new station to
an existing program number.
You can listen to a stored radio station as follows:
Switch the system on by pressing Standby/On ( ).
Select the TUNER function by pressing TUNER/BAND .
Select the required frequency band by pressing TUNER/BAND.
Select the radio station as follows.
To listen to ... Press ...
A stored station........................... a Press the TUNING MODE button
until “PRESET” is displayed.
b TUNING and to select the
required station.
Press TUNING MODE again to exit the stored station selection
function.
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials
before fixing them permanently
If reception from a specific FM radio station is poor, press MO/ST
to switch from stereo mode to mono. The quality of the sound will
be improved.
GB
GB
Selecting a Stored Station
Improving Radio Reception
Searching for and Storing the Radio
Stations(continued)
8
9
1
2
3
4
8
1
2,3
4
14
15
You can check and change your selection of tracks at any time.
You must have selected at least one track.
Press STOP ( ) once if you have started listening to the selection.
Press PROGRAM / SET.
Each time you press Program/Set, the next selection is displayed.
Press PROGRAM / SET one or more times until the track to be changed
is displayed.
Press or to select the new track.
Press PROGRAM / SET.
Press
MP3-
CD ( ) to start listening to the selection.
Result
: The first track selected is played.
You can change one or more tracks in your initial selection
You can store up to:
15 FM stations
15 AM station
Switch the system on by pressing Standby/On ( )
Select the TUNER function by pressing TUNER/BAND.
Select the required frequency band by pressing TUNER/BAND again.
Result:
The appropriate indication is displayed:
FM Frequency Modulation
AM(MW) Medium Wave
To search for a station ... Press Tuning Mode ...
Manually.......................................One or more times until MANUAL is
displayed.
Automatically................................One or more times until AUTO is
displayed.
Select the station to be stored by pressing , on the front panel
to decrease or increase the frequency respectively.
To scroll through the frequencies faster when searching manually,
hold down the , on the front panel .
The automatic search procedure may stop on a frequency that does
not correspond to a radio station.
If this happens, use the manual search mode.
Adjust the volume by:
Turning the VOLUME knob on the front panel
or
Pressing the VOLUME+, - button on the remote control.
Select the FM stereo or mono mode by pressing MO/ST on
the remote control.
Checking and Changing Programmed
Tracks
Searching for and Storing the Radio
Stations
1
2
3
4
5
6
1
2
3
4
5
1
2,3
6
7
4
5
5 6
4
7
1
6
2,3,5
2,3
2,3
4
4
8
8
