465155
29
Zoom out
Zoom in
Previous page
1/39
Next page
English 29
04 Basic Functions
CT (Clock Time) : Decodes the real time clock from the FM
frequency. Some stations may not transmit PTY, RT or CT
information therefore this may not be displayed in all cases.
TA (Traffi c Announcement) : When this symbol fl ashes it
shows that the traffi c announcement is in progress.
NOTE
RDS may not operate correctly if the station tuned
is not transmitting RDS signal properly or if the
signal strength is weak.
To show the RDS signals
You can see the RDS signals the station sends on the display.
Press the RDS DISPLAY button while listening to an FM
station.
Each time you press the button, the display
change to show you the following information : PS
NAME RT CT Frequency
PS
(Program Service)
While searching, <PS> appears
and then the station names will be
displayed. <NO PS> appears if no
signal is sent.
RT(RadioText)
While searching, <RT> appears and
then text messages the station sends
will be displayed. <NO RT> appears if
no signal is sent.
CT (Clock Time)
Decodes the real time clock from the
FM frequency.
Some stations may not transmit PTY,
RT or CT information therefore this
may not be displayed in all cases.
Frequency
Station frequency (non-RDS
service)
About characters shown in the display
When the display shows PS,or RT signals,the following
characters are used.
The display window cannot differentiate upper case
and lower case letters and always uses upper case
letters.
The display window cannot show accented letters,
<A,> for instance, may stands for accented <As>
like <À, Â, Ä, Á, Å and Ã.>
PTY (Program Type) indication and
PTY-SEARCH function
One of the advantages of the RDS service is that
you can locate a particular kind of program from
the preset channels by specifying the PTY codes.
To search for a program using the PTY
codes
Before you start!
The PTY Search is only applicable to preset stations.
To stop searching any time during the process,
press
the
STOP
button while searching.
There is a time limit in doing the following steps.
If the setting is cancelled before you fi nish, start from
step 1 again.
When pressing the buttons on the primary remote
control, make sure that you have selected the FM
station using the primary remote control.
Press the 1. RDS PTY button while listening to an
FM station.
Press the 2. TUNING
( )
button until the PTY
code you want appears on the display.
The display gives you the PTY codes
described to the right.
Press the 3. RDS PTY button again, while the PTY code
selected in the previous step is still on the display.
The centre unit searches 30 preset FM stations,
stops when it fi nds the one you have selected,
and tunes in that station.
NOTE
* This product may not have the RDS PTY , RDS DISPLAY
function depending on your region.
MM-D470D-ENG-0602.indd 29MM-D470D-ENG-0602.indd 29 2011-6-3 10:17:222011-6-3 10:17:22
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung MM-D470D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung MM-D470D in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info