586979
100
Zoom out
Zoom in
Previous page
1/130
Next page
Supplies and accessories_ 100
2. Pull the imaging unit out.
3. Remove the new imaging unit from its bag.
Do not use sharp objects, such as a knife or scissors, to open
the toner cartridge package. They might scratch the drum of
the cartridge.
To
prevent damage to the imaging unit, do not expose it to light
for more than a few minutes. Cover it with a piece of paper, if
necessary.
4. Thoroughly shake the imaging unit 5 or 6 ti
mes to distribute the toner
evenly inside the imaging unit.
5. Remove the protection cover and seal.
6. Hold the imaging unit by the handle and slowly insert the cartridge into
the opening in the machine.
Tabs on the sides of the imaging unit a
nd corresponding grooves within
the machine will guide the imaging unit into the correct position until it
locks into place completely.
Do not touch the green surface of the imaging unit.
To prevent damage to the imaging unit, d
o not expose it to light
for more than a few minutes. Cover it with a piece of paper, if
necessary.
7. Reinsert the toner cartridge.
8. Close the top cover. Make sure that the cover is securely closed.
NECESSARY PRECAUTIONS TO TAKE WHEN
INSTALLING ACCESSORIES
Disconnect the power cord.
To avoid the possibility of an electrical shock, always disconnect the
po
wer cord when installing or removing ANY internal or external acces-
sories.
Discharge static electricity.
T
he control board and internal accessories (network interface card or
memory modu
le) are sensitive to static electricity. Before installing or
removing any internal accessories, discharge static electricity from your
body by touching something metal, such as the metal back plate on any
device plugged into a grounded power source. If you walk around before
finishing the installation, repeat this procedure to discharge any static
electricity again.
Activatin
g the added accessories in the PS driver properties.
After installing an accessory such as an optional tray, PS driver users
must do the additiona
l setting. Go to the PS printer properties and set
the added accessory activated.
When installing accessories, the battery inside the machine is a ser-
vice component and needs to be replaced by an authorized servicer.
Do
not change it by yourself.
There is a risk of an explosion if battery is replaced by an incorrect
type.
ACTIVATING THE ADDED ACCESSORIES IN
PRINTER PROPERTIES
After installing added accessories, you need to select it in the printer proper-
ties of the printer driver in order to use it.
1. Install the driver (See "
Installing locally connected machine’s driver" on
page 32 or "Installing network connected machine’s driver" on page 38).
2. Click the
Windows St
art menu.
3. For Windows 2000, select Set
tings > Printers.
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung ML-6510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung ML-6510 in the language / languages: English as an attachment in your email.

The manual is 34,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung ML-6510

Samsung ML-6510 User Manual - German - 137 pages

Samsung ML-6510 User Manual - Dutch - 132 pages

Samsung ML-6510 User Manual - French - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info