586979
95
Zoom out
Zoom in
Previous page
1/130
Next page
Troubleshooting_ 95
Common Windows problems
CONDITION SUGGESTED SOLUTIONS
“File in Use” mes-
sage appears dur-
ing installation.
Exit all software applications. Remove all soft-
ware from the printer’s startup group, then
restart Windows. Reinstall the printer driver.
“General Protection
Fault”, “Exception
OE”, “Spool 32”, or
“Illegal Operation”
messages appear.
Close all other applications, reboot Windows
and try printing again.
“Fail To Print”, “A
printer timeout error
occurred” mes-
sages appear.
These messages may appear during printing.
Just keep waiting until the machine finishes
printing. If the message appears in standby
mode or after printing has been completed,
check the connection and/or whether an error
has occurred.
Refer to Microsoft Windows User’s Guide that came with your com-
puter for further in
formation on Windows error messages.
Common Linux problems
CONDITION SUGGESTED SOLUTIONS
The machine does
not print.
Check if the printer driver is installed in your
system. Open Unified Driver Configurator and
switch to the Printers tab in Printers config-
uration windo
w to look at the list of available
machines. Make sure that your machine is
displayed on the list. If not, open Add new
printer wizard to set up your device.
Ch
eck if the machine is started. Open Print-
e
rs configuration a
nd select your machine
on the printers list. Look at the description in
the Selected printer pane. If its status con-
tains Stopped
string, press the Start button.
After that normal operation of the machine
should be restored. The “stopped” status
might be activated when some problems in
printing occurred. For instance, this could be
an attempt to print a document when the port
is claimed by a scanning application.
En
sure the port is not busy. Since functional
components of machine (printer and scanner)
share the same I/O interface (port), the situa-
tion of simultaneous access of different user
appli
cations to the same port is possible. To
avoid possible conflicts, only one of them at a
time is allowed to gain control over the device.
The other user will encounter “device busy”
response. You should open ports configura-
tion and select the port assigned to your
mach
ine. In
the Selected port pane you can
see if the port is occupied by some other
application. If this is the case, you should
either wait for completion of the current job or
press the Release port button, if you are sure
that the present application is not functioning
properly.
Ch
eck if your application has special print
o
ption such as “-oraw”. If “-oraw” is specified
in the command line parameter, then remove
it to print properly. For Gimp front-end, select
“print” -> “Setup printer” and edit command
line parameter in the command item.
The CUPS (Common UNIX Printing System)
version distributed with SuSE Linux 9.2
(cups-1.1.21) has a problem with ipp (Internet
Printing Protocol) printing.Use the socket
printing instead of ipp or install a later version
of CUPS (cups-1.1.22 or higher).
Some color images
come out all black.
This is a known bug in Ghostscript (until GNU
Ghostscript version 7.05) when the base color
space of the document is indexed color space
and it is converted through CIE color space.
Because Postscript uses CIE color space for
Color Matching System, you should upgrade
Ghostscript on your system to at least GNU
Ghostscript version 7.06 or later. You can find
recent Ghostscript versions at www.ghost-
script.com.
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung ML-6510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung ML-6510 in the language / languages: English as an attachment in your email.

The manual is 34,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung ML-6510

Samsung ML-6510 User Manual - German - 137 pages

Samsung ML-6510 User Manual - Dutch - 132 pages

Samsung ML-6510 User Manual - French - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info