586982
48
Zoom out
Zoom in
Previous page
1/130
Next page
Media and tray_ 48
fusing temperature about 170°C (338 °F) for 0.1 second. The extra flaps
and strips might cause wrinkling, creasing, or jams and may even dam-
age the fuser.
For the best print quality, posi
tion margins no closer than 15 mm from
the edges of the envelope.
Avo
id printing over the area where the envelope’s seams meet.
Transparency
To avoid damaging the machine, use only transparencies designed for use
in laser printers.
Transparencies used in the machine must be able to withstand
machine’s fusing temperature.
Place them on a flat surface after removing them from the machine.
Do not leave unused transparencies in the paper tray for long periods of
ti
me. Dust and dirt may accumulate on them, resulting in spotty printing.
To avo
id smudging caused by fingerprints, handle them carefully.
To avoid fading, do not expose printed transparencies to prolonged sun-
light.
Ensure
that transp
arencies are not wrinkled, curled, or have any torn
edges.
Do not use transparencies that separates from the backing sheet.
To prevent transparencies from sticking to each other, do not let the
p
rinted sheets stack up as they are begin printed out.
Base
type transparency (ex. Xerox 3R3117) results in better image and
pap
er handling quality than paper backed (ex. Xerox 3R3028) or remov-
able stripe (3R3108) ones.
Depending on the selection or storage conditions of the transpar-
ency, jam or image scratch might occur.
Labels
To avoid damaging the machine, use only labels designed for use in laser
machines.
When selecting labels, consider the following factors:
- Adhesives: Th
e adhesive material should be stable at your
machine’s fusing temperature about 170°C (338 °F).
- Arra
ngement: Onl
y use labels with no exposed backing between
them. Labels can peel off sheets that have spaces between the
labels, causing serious jams.
- Curl: Prior to
printing, labels must lie flat with no more than 13 mm
of curl in any direction.
- Co
ndition: D
o not use labels with wrinkles, bubbles, or other indica-
tions of separation.
Do not use labels with slick back.
Do not use partially used labels.
Do not use the labels with separated edges.
Make sure that there is no exposed adhesive material between labels.
Exp
osed areas can cause labels to peel off during printing, which can
cause paper jams. Exposed adhesive can also cause damage to
machine components.
D
o not run a sheet of labels through the machine more than once. The
a
dhesive backing is designed for only a single pass through the
machine.
D
o not use labels that are separating from the backing sheet or are wrin-
kled, bubbled, or otherwise damaged.
Card stock/Custom-sized paper
Do not print on media smaller than 76.2 mm (3 inches) wide or 127 mm
(5 inches) long.
In the software application, set margins at least 6.4 mm (0.25 inches)
away from the edges of the material.
U
sable minimum weight of 3*5 inches paper is 105g/m². (28 lbs bond)
Ensure that 76.2 mm (3 inches) X 127 mm (5 inches) is not curled or has
no torn edges. Depending on the curl of 76.2 mm (3 inches) X 127 mm
(5
inches) paper, jam might occur.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung ML-551x Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung ML-551x Series in the language / languages: English as an attachment in your email.

The manual is 34,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung ML-551x Series

Samsung ML-551x Series User Manual - German - 137 pages

Samsung ML-551x Series User Manual - Dutch - 132 pages

Samsung ML-551x Series User Manual - French - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info