Slide the OPEN button to
open the door, and insert
an MP3(WMA)-CD.
•
Push the door to close it.
1
Press the SEL key to the
√»
position.
•
The inserted MP3(WMA)-CD
will be scanned for about
30~90 seconds. Playback will
then commence.
Your CD Player will take a
few moments to scan through
all the tracks and the sessions
recorded on a MP3(WMA)-CD.
2
To stop playback, press the SEL
key to the
■
position.
•
Press and hold the SEL key to the
■
position to switch off the unit.
3
• If a music file is corrupted and a particular section cannot be read, only
that section will be skipped. But if the file continues to be unreadable,
the player will skip to the next file.
•
Files that do not conform to specifications (refer to P. 34) will be skipped.
• When the OPEN switch is slid to open the door, playback will stop.
• The quality of MP3(WMA)-CD playback may vary depending on the condition of the
disc containing the music files or the condition of the recorder with which the disc
was created.
• If different types of files or unnecessary folders are on the same disc, you will have
problems with playback.
Note
MP3(WMA)-CD Playback
Skip
Press the SEL key to the left or right.
(Slide the
Iî
or
ï
I to the left or right on the
main unit.)
• Press the SEL key to the
ï
I
position to play the next track.
Press the SEL key to the
Iî
position to go back to the
beginning of the current track. (Press the SEL key to the
Iî
position twice to repeat the previous track).
• Press the SEL key to the
ï
I
position while the unit is in
“Stop” (no playback) mode. Track 2 will be played back.
Press the SEL key to the
Iî
position to play back the
previous song.
Search
Press and hold the SEL key to the left or
right during playback of a CD.
•
Press and hold
the SEL key to the left or right.
The CD will play back in fast forward or fast reverse
mode.
•
Release the key to return to normal playback mode.
• Buttons pressed during CD playback will not function.
• Use the HOLD function when carrying your CD Player around with you.
Use of this function will allow you to conserve battery life as it prevents
the CD Player from being turned on if a button is pressed unintentionally.
• The remote control will still operate while the HOLD function on the main
unit is active. (On the display, the “HOLD” indicator will be displayed.)
• The main unit will still operate while the HOLD function on the remote
control is active.(On the display, the “ ” indicator will be displayed.)
HOLD function
Main Unit
Remote Control
Skip/Search function
Bottom of the Main Unit
DIR
Number
indicator
Track
Number
indicator
DIR Name indicator
Title indicator
L/R Channel
Level Indicator
Playtime
indicator
Bit rate indicator
Sampling Frequency
Indicator
MCD-CF570(GB-F120%) 4/2/05 16:14 Page 13
