English - 46
Setting Up Anynet
+
Press the
TOOLS button to display the Tools menu. You can also display Anynet
+
menu by
selecting
+
(HDMI-CEC).
Setup
Anynet
+
To use the Anynet
+
Function, Anynet
+
(HDMI-CEC) must be set to On.
When the
Anynet
+
(HDMI-CEC) function is disabled, all the Anynet+ related operations are
deactivated.
Setting an Anynet
+
Device to turn Off automatically when the TV is turned Off.
The active source on the TV remote must be set to TV to use the Anynet
+
function.
If you set
Auto Turn Off to Yes, connected external devices are also turned off when the
TV is turned off. If an external device is still recording, it may or may not turn off.
Switching between Anynet
+
Devices
1. Press the
TOOLS button. Press the ENTER
E
button to select Anynet
+
(HDMI-CEC).
2.
Device List, then press the ENTER
E
button.
Anynet
+
devices connected to the TV are listed.
If you cannot find a device you want, press the red button to scan for devices.
3.
ENTER
E
button. It
is switched to the selected device.
Only when you set
Anynet
+
(HDMI-CEC) to On in the Application menu, the Device
List
menu appears.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to
the TV may not always be automatically displayed in the device list. Press the red button to search for the connected device.
If you have selected external input mode by pressing the
SOURCE button, you cannot use the Anynet
+
function. Make sure to
switch to an Anynet
+
device by using the
Device List.
Anynet
+
Menu
The Anynet
+
menu changes depending on the type and status of the Anynet
+
devices connected to the TV.
Anynet
+
Menu Description
View TV Anynet
+
mode changes to TV broadcast mode.
Device List Shows the Anynet
+
device list.
(device_name)
MENU
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc
menu of the DVD recorder will appear.
(device_name)
INFO
Shows the play menu of the connected device. E.g. If a DVD recorder is connected,
the play menu of the DVD recorder will appear.
Recording: (*recorder)
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
¦
T
❑
■
N
■
N
N
¦
N
N
N
N
N
N
N
N
N
U
E
R
U
E
R
U
E
R
BN68-02325A-Eng.indb 46 2009-05-19 3:43:18
